diff --git a/INSTALL b/INSTALL
index 095b1eb40..209984075 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,16 +1,25 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
+Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
+Inc.
 
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
 
 Basic Installation
 ==================
 
-These are generic installation instructions.
+   Briefly, the shell command `./configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +32,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,30 +44,37 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
-The simplest way to compile this package is:
+   The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
   3. Optionally, type `make check' to run any self-tests that come with
-     the package.
+     the package, generally using the just-built uninstalled binaries.
 
   4. Type `make install' to install the programs and any data files and
-     documentation.
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
 
-  5. You can remove the program binaries and object files from the
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
@@ -67,65 +83,120 @@ The simplest way to compile this package is:
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
 
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,14 +208,58 @@ find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved.  Use GNU `make'
+instead.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -152,14 +267,15 @@ type, such as `sun4', or a canonical name which has the form:
 
 where SYSTEM can have one of these forms:
 
-     OS KERNEL-OS
+     OS
+     KERNEL-OS
 
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -170,9 +286,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +297,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -189,17 +305,31 @@ them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf limitation.  Until the limitation is lifted, you can use
+this workaround:
+
+     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'
-     Print a summary of the options to `configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
 
 `--version'
 `-V'
@@ -226,6 +356,15 @@ overridden in the site shell script).
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.
-
diff --git a/scripts/compile b/scripts/compile
index b1f474915..531136b06 100755
--- a/scripts/compile
+++ b/scripts/compile
@@ -1,10 +1,9 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand '-c -o'.
 
-scriptversion=2012-01-04.17; # UTC
+scriptversion=2012-10-14.11; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -79,6 +78,53 @@ func_file_conv ()
   esac
 }
 
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
 # func_cl_wrapper cl arg...
 # Adjust compile command to suit cl
 func_cl_wrapper ()
@@ -109,43 +155,34 @@ func_cl_wrapper ()
 	      ;;
 	  esac
 	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
 	-I*)
 	  func_file_conv "${1#-I}" mingw
 	  set x "$@" -I"$file"
 	  shift
 	  ;;
-	-l*)
-	  lib=${1#-l}
-	  found=no
-	  save_IFS=$IFS
-	  IFS=';'
-	  for dir in $lib_path $LIB
-	  do
-	    IFS=$save_IFS
-	    if $shared && test -f "$dir/$lib.dll.lib"; then
-	      found=yes
-	      set x "$@" "$dir/$lib.dll.lib"
-	      break
-	    fi
-	    if test -f "$dir/$lib.lib"; then
-	      found=yes
-	      set x "$@" "$dir/$lib.lib"
-	      break
-	    fi
-	  done
-	  IFS=$save_IFS
-
-	  test "$found" != yes && set x "$@" "$lib.lib"
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
 	  shift
 	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
 	-L*)
-	  func_file_conv "${1#-L}"
-	  if test -z "$lib_path"; then
-	    lib_path=$file
-	  else
-	    lib_path="$lib_path;$file"
-	  fi
-	  linker_opts="$linker_opts -LIBPATH:$file"
+	  func_cl_dashL "${1#-L}"
 	  ;;
 	-static)
 	  shared=false
diff --git a/scripts/config.guess b/scripts/config.guess
index 9afd67620..1f5c50c0d 100755
--- a/scripts/config.guess
+++ b/scripts/config.guess
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2013-11-29'
+timestamp='2014-03-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -50,7 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -149,7 +149,7 @@ Linux|GNU|GNU/*)
 	LIBC=gnu
 	#endif
 	EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
 	;;
 esac
 
@@ -826,7 +826,7 @@ EOF
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
+    *:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -969,10 +969,10 @@ EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
-    or1k:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
 	exit ;;
-    or32:Linux:*:*)
+    or32:Linux:*:* | or1k*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
@@ -1371,154 +1371,6 @@ EOF
 	exit ;;
 esac
 
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
 cat >&2 <<EOF
 $0: unable to guess system type
 
diff --git a/scripts/config.sub b/scripts/config.sub
index 61cb4bc22..bba4efb80 100755
--- a/scripts/config.sub
+++ b/scripts/config.sub
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2013-10-01'
+timestamp='2014-09-11'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -68,7 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -283,8 +283,10 @@ case $basic_machine in
 	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
 	| mipsisa64 | mipsisa64el \
 	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipsr5900 | mipsr5900el \
@@ -296,11 +298,11 @@ case $basic_machine in
 	| nds32 | nds32le | nds32be \
 	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| open8 \
-	| or1k | or32 \
+	| open8 | or1k | or1knd | or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
+	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
@@ -402,8 +404,10 @@ case $basic_machine in
 	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
 	| mipsisa64-* | mipsisa64el-* \
 	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipsr5900-* | mipsr5900el-* \
@@ -415,6 +419,7 @@ case $basic_machine in
 	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
+	| or1k*-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
@@ -824,6 +829,10 @@ case $basic_machine in
 		basic_machine=powerpc-unknown
 		os=-morphos
 		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -1369,14 +1378,14 @@ case $os in
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
 	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1594,9 +1603,6 @@ case $basic_machine in
 	mips*-*)
 		os=-elf
 		;;
-	or1k-*)
-		os=-elf
-		;;
 	or32-*)
 		os=-coff
 		;;
diff --git a/scripts/depcomp b/scripts/depcomp
index ff4e08f4a..4ebd5b3a2 100755
--- a/scripts/depcomp
+++ b/scripts/depcomp
@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2011-12-04.11; # UTC
+scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@ scriptversion=2011-12-04.11; # UTC
 
 case $1 in
   '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -57,6 +56,66 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -69,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -80,26 +142,32 @@ if test "$depmode" = hp; then
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
 fi
 
 cygpath_u="cygpath -u -f -"
 if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
 fi
 
 if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -122,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -131,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -145,15 +216,14 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the "deleted header file" problem.
@@ -162,16 +232,15 @@ gcc)
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
 ## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -189,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -198,43 +266,41 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
     # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
 
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
   # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -247,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -258,57 +322,113 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
+  aix_post_process_depfile
   ;;
 
-icc)
-  # Intel's C compiler understands '-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
   "$@" -MD -MF "$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
+  # `$object: dependent.h' and one to simply `dependent.h:'.
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -319,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -332,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -343,77 +461,61 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add 'dependent.h:' lines.
     sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in 'foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
 
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
 
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
 
 msvc7)
   if test "$libtool" = yes; then
@@ -424,8 +526,7 @@ msvc7)
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -443,14 +544,15 @@ msvc7)
   p
 }' | $cygpath_u | sort -u | sed -n '
 s/ /\\ /g
-s/\(.*\)/	\1 \\/p
+s/\(.*\)/'"$tab"'\1 \\/p
 s/.\(.*\) \\/\1:/
 H
 $ {
-  s/.*/	/
+  s/.*/'"$tab"'/
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -502,14 +604,14 @@ dashmstdout)
   # in the target name.  This is to cope with DOS-style filenames:
   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -562,11 +664,12 @@ makedepend)
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -602,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -637,23 +740,23 @@ msvisualcpp)
       shift
       ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
   "$@" -E 2>/dev/null |
   sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
   sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
diff --git a/scripts/install-sh b/scripts/install-sh
index 0b65ee871..377bb8687 100755
--- a/scripts/install-sh
+++ b/scripts/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-10-22.00
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,42 +35,72 @@ scriptversion=2004-10-22.00
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,108 +110,148 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    --help) echo "$usage"; exit 0;;
+    --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
-    --version) echo "$0 $scriptversion"; exit 0;;
+    --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
   esac
+  shift
 done
 
-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src ;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
   else
+
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +260,194 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
+    dst=$dst_arg
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
 
-  # Make sure that the destination directory exists.
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
 
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
 
-    pathcomp=
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
       fi
-      pathcomp=$pathcomp/
-    done
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +455,9 @@ do
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,51 +465,63 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
 
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit
-	       }
-	     else
-	       :
-	     fi
-	   } &&
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
 
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit; }
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/scripts/mdate-sh b/scripts/mdate-sh
index b610b47a6..b3719cf76 100755
--- a/scripts/mdate-sh
+++ b/scripts/mdate-sh
@@ -1,6 +1,9 @@
 #!/bin/sh
 # Get modification time of a file or directory and pretty-print it.
-# Copyright (C) 1995, 1996, 1997, 2003  Free Software Foundation, Inc.
+
+scriptversion=2010-08-21.06; # UTC
+
+# Copyright (C) 1995-2013 Free Software Foundation, Inc.
 # written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
 #
 # This program is free software; you can redistribute it and/or modify
@@ -14,14 +17,55 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+fi
+
+case $1 in
+  '')
+     echo "$0: No file.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification day of FILE, in the format:
+1 January 1970
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+error ()
+{
+  echo "$0: $1" >&2
+  exit 1
+}
+
+
 # Prevent date giving response in another language.
 LANG=C
 export LANG
@@ -30,7 +74,15 @@ export LC_ALL
 LC_TIME=C
 export LC_TIME
 
-save_arg1="$1"
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume 'unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
 
 # Find out how to get the extended ls output of a file or directory.
 if ls -L /dev/null 1>/dev/null 2>&1; then
@@ -38,27 +90,32 @@ if ls -L /dev/null 1>/dev/null 2>&1; then
 else
   ls_command='ls -l -d'
 fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+  ls_command="$ls_command -n"
+fi
 
-# A `ls -l' line looks as follows on OS/2.
+# A 'ls -l' line looks as follows on OS/2.
 #  drwxrwx---        0 Aug 11  2001 foo
 # This differs from Unix, which adds ownership information.
 #  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
 #
 # To find the date, we split the line on spaces and iterate on words
 # until we find a month.  This cannot work with files whose owner is a
-# user named `Jan', or `Feb', etc.  However, it's unlikely that `/'
+# user named "Jan", or "Feb", etc.  However, it's unlikely that '/'
 # will be owned by a user whose name is a month.  So we first look at
 # the extended ls output of the root directory to decide how many
 # words should be skipped to get the date.
 
 # On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-set - x`$ls_command /`
+set x`$ls_command /`
 
 # Find which argument is the month.
 month=
 command=
 until test $month
 do
+  test $# -gt 0 || error "failed parsing '$ls_command /' output"
   shift
   # Add another shift to the command.
   command="$command shift;"
@@ -78,14 +135,35 @@ do
   esac
 done
 
+test -n "$month" || error "failed parsing '$ls_command /' output"
+
 # Get the extended ls output of the file or directory.
-set - x`eval "$ls_command \"\$save_arg1\""`
+set dummy x`eval "$ls_command \"\\\$save_arg1\""`
 
 # Remove all preceding arguments
 eval $command
 
-# Get the month.  Next argument is day, followed by the year or time.
-case $1 in
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
   Jan) month=January; nummonth=1;;
   Feb) month=February; nummonth=2;;
   Mar) month=March; nummonth=3;;
@@ -100,7 +178,10 @@ case $1 in
   Dec) month=December; nummonth=12;;
 esac
 
-day=$2
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
 
 # Here we have to deal with the problem that the ls output gives either
 # the time of day or the year.
@@ -131,3 +212,13 @@ esac
 
 # The result.
 echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/scripts/missing b/scripts/missing
index 3392b9e70..db98974ff 100755
--- a/scripts/missing
+++ b/scripts/missing
@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2004-09-07.08
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -18,9 +17,7 @@ scriptversion=2004-09-07.08
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -28,326 +25,191 @@ scriptversion=2004-09-07.08
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
+case $1 in
 
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
 
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
-    exit 0
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
     echo "missing $scriptversion (GNU Automake)"
-    exit 0
+    exit $?
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
 
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
 
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/scripts/mkinstalldirs b/scripts/mkinstalldirs
index 6fbe5e117..55d537f87 100755
--- a/scripts/mkinstalldirs
+++ b/scripts/mkinstalldirs
@@ -1,7 +1,7 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
 
-scriptversion=2004-02-15.20
+scriptversion=2009-04-28.21; # UTC
 
 # Original author: Noah Friedman <friedman@prep.ai.mit.edu>
 # Created: 1993-05-16
@@ -11,8 +11,11 @@ scriptversion=2004-02-15.20
 # bugs to <bug-automake@gnu.org> or send patches to
 # <automake-patches@gnu.org>.
 
+nl='
+'
+IFS=" ""	$nl"
 errstatus=0
-dirmode=""
+dirmode=
 
 usage="\
 Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
@@ -27,7 +30,7 @@ while test $# -gt 0 ; do
   case $1 in
     -h | --help | --h*)         # -h for help
       echo "$usage"
-      exit 0
+      exit $?
       ;;
     -m)                         # -m PERM arg
       shift
@@ -37,7 +40,7 @@ while test $# -gt 0 ; do
       ;;
     --version)
       echo "$0 $scriptversion"
-      exit 0
+      exit $?
       ;;
     --)                         # stop option processing
       shift
@@ -78,9 +81,9 @@ case $dirmode in
       echo "mkdir -p -- $*"
       exec mkdir -p -- "$@"
     else
-      # On NextStep and OpenStep, the `mkdir' command does not
+      # On NextStep and OpenStep, the 'mkdir' command does not
       # recognize any option.  It will interpret all options as
-      # directories to create, and then abort because `.' already
+      # directories to create, and then abort because '.' already
       # exists.
       test -d ./-p && rmdir ./-p
       test -d ./--version && rmdir ./--version
@@ -103,13 +106,21 @@ esac
 
 for file
 do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
   shift
+  IFS=$oIFS
 
-  pathcomp=
   for d
   do
-    pathcomp="$pathcomp$d"
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
     case $pathcomp in
       -*) pathcomp=./$pathcomp ;;
     esac
@@ -124,7 +135,7 @@ do
       else
 	if test ! -z "$dirmode"; then
 	  echo "chmod $dirmode $pathcomp"
-	  lasterr=""
+	  lasterr=
 	  chmod "$dirmode" "$pathcomp" || lasterr=$?
 
 	  if test ! -z "$lasterr"; then
@@ -134,7 +145,7 @@ do
       fi
     fi
 
-    pathcomp="$pathcomp/"
+    pathcomp=$pathcomp/
   done
 done
 
@@ -146,5 +157,6 @@ exit $errstatus
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
diff --git a/scripts/texinfo.tex b/scripts/texinfo.tex
index bc7002da9..47008b0b3 100644
--- a/scripts/texinfo.tex
+++ b/scripts/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2012-01-19.16}
+\def\texinfoversion{2013-02-01.11}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software: you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
@@ -24,13 +24,14 @@
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
-% restriction.  (This has been our intent since Texinfo was invented.)
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-%   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org).
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
 % The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
@@ -594,7 +595,7 @@
 \def\:{\spacefactor=1000 }
 
 % @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
 
 % @/ allows a line break.
 \let\/=\allowbreak
@@ -887,7 +888,7 @@ where each line of input produces a line of output.}
 \def\popthisfilestack{\errthisfilestackempty}
 \def\errthisfilestackempty{\errmessage{Internal error:
   the stack of filenames is empty.}}
-
+%
 \def\thisfile{}
 
 % @center line
@@ -895,36 +896,46 @@ where each line of input produces a line of output.}
 %
 \parseargdef\center{%
   \ifhmode
-    \let\next\centerH
+    \let\centersub\centerH
   \else
-    \let\next\centerV
+    \let\centersub\centerV
   \fi
-  \next{\hfil \ignorespaces#1\unskip \hfil}%
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
 }
-\def\centerH#1{%
-  {%
-    \hfil\break
-    \advance\hsize by -\leftskip
-    \advance\hsize by -\rightskip
-    \line{#1}%
-    \break
-  }%
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
 }
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
 
 % @sp n   outputs n lines of vertical space
-
+%
 \parseargdef\sp{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-
+%
 \def\comment{\begingroup \catcode`\^^M=\other%
 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
 \commentxxx}
 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
+%
 \let\c=\comment
 
 % @paragraphindent NCHARS
@@ -1107,7 +1118,7 @@ where each line of input produces a line of output.}
 % #1 is a control sequence in which to do the replacements,
 % which we \xdef.
 \def\txiescapepdf#1{%
-  \ifx\pdfescapestring\relax
+  \ifx\pdfescapestring\thisisundefined
     % No primitive available; should we give a warning or log?
     % Many times it won't matter.
   \else
@@ -1173,8 +1184,8 @@ output) for that.)}
   %
   % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
   \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
-    \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
     %
     % pdftex (and the PDF format) support .pdf, .png, .jpg (among
     % others).  Let's try in that order, PDF first since if
@@ -1212,8 +1223,8 @@ output) for that.)}
     \else
       \immediate\pdfximage
     \fi
-      \ifdim \wd0 >0pt width \imagewidth \fi
-      \ifdim \wd2 >0pt height \imageheight \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
       \ifnum\pdftexversion<13
          #1.\pdfimgext
        \else
@@ -1357,12 +1368,17 @@ output) for that.)}
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
-      \ifx\p\space\else\addtokens{\filename}{\PP}%
-        \advance\filenamelength by 1
-      \fi
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
     \fi
     \nextsp}
-  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
   \ifnum\pdftexversion < 14
     \let \startlink \pdfannotlink
   \else
@@ -1459,9 +1475,6 @@ output) for that.)}
 \def\ttsl{\setfontstyle{ttsl}}
 
 
-% Default leading.
-\newdimen\textleading  \textleading = 13.2pt
-
 % Set the baselineskip to #1, and the lineskip and strut size
 % correspondingly.  There is no deep meaning behind these magic numbers
 % used as factors; they just match (closely enough) what Knuth defined.
@@ -1473,6 +1486,7 @@ output) for that.)}
 % can get a sort of poor man's double spacing by redefining this.
 \def\baselinefactor{1}
 %
+\newdimen\textleading
 \def\setleading#1{%
   \dimen0 = #1\relax
   \normalbaselineskip = \baselinefactor\dimen0
@@ -1745,18 +1759,24 @@ end
 \fi\fi
 
 
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
+% Set the font macro #1 to the font named \fontprefix#2.
 % #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
 \def\setfont#1#2#3#4#5{%
   \font#1=\fontprefix#2#3 scaled #4
   \csname cmap#5\endcsname#1%
 }
 % This is what gets called when #5 of \setfont is empty.
 \let\cmap\gobble
-% emacs-page end of cmaps
+%
+% (end of cmaps)
 
 % Use cm as the default font prefix.
 % To specify the font prefix, you must define \fontprefix
@@ -1766,7 +1786,7 @@ end
 \fi
 % Support font families that don't use the same naming scheme as CM.
 \def\rmshape{r}
-\def\rmbshape{bx}               %where the normal face is bold
+\def\rmbshape{bx}               % where the normal face is bold
 \def\bfshape{b}
 \def\bxshape{bx}
 \def\ttshape{tt}
@@ -1781,8 +1801,7 @@ end
 \def\scshape{csc}
 \def\scbshape{csc}
 
-% Definitions for a main text size of 11pt.  This is the default in
-% Texinfo.
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
 %
 \def\definetextfontsizexi{%
 % Text fonts (11.2pt, magstep1).
@@ -1907,7 +1926,7 @@ end
 \textleading = 13.2pt % line spacing for 11pt CM
 \textfonts            % reset the current fonts
 \rm
-} % end of 11pt text font size definitions
+} % end of 11pt text font size definitions, \definetextfontsizexi
 
 
 % Definitions to make the main text be 10pt Computer Modern, with
@@ -2039,7 +2058,7 @@ end
 \textleading = 12pt   % line spacing for 10pt CM
 \textfonts            % reset the current fonts
 \rm
-} % end of 10pt text font size definitions
+} % end of 10pt text font size definitions, \definetextfontsizex
 
 
 % We provide the user-level command
@@ -2254,8 +2273,6 @@ end
 
 \gdef\markupsetcodequoteleft{\let`\codequoteleft}
 \gdef\markupsetcodequoteright{\let'\codequoteright}
-
-\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
 }
 
 \let\markupsetuplqcode \markupsetcodequoteleft
@@ -2264,6 +2281,9 @@ end
 \let\markupsetuplqexample \markupsetcodequoteleft
 \let\markupsetuprqexample \markupsetcodequoteright
 %
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
 \let\markupsetuplqsamp \markupsetcodequoteleft
 \let\markupsetuprqsamp \markupsetcodequoteright
 %
@@ -2273,8 +2293,6 @@ end
 \let\markupsetuplqverbatim \markupsetcodequoteleft
 \let\markupsetuprqverbatim \markupsetcodequoteright
 
-\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
-
 % Allow an option to not use regular directed right quote/apostrophe
 % (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
 % The undirected quote is ugly, so don't make it the default, but it
@@ -2364,8 +2382,7 @@ end
   \aftersmartic
 }
 
-% like \smartslanted except unconditionally uses \ttsl, and no ic.
-% @var is set to this for defun arguments.
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
 \def\ttslanted#1{{\ttsl #1}}
 
 % @cite is like \smartslanted except unconditionally use \sl.  We never want
@@ -2430,34 +2447,12 @@ end
 % @samp.
 \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
 
-% definition of @key that produces a lozenge.  Doesn't adjust to text size.
-%\setfont\keyrm\rmshape{8}{1000}{OT1}
-%\font\keysy=cmsy9
-%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-%    \vbox{\hrule\kern-0.4pt
-%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-%    \kern-0.4pt\hrule}%
-%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
 
-% definition of @key with no lozenge.  If the current font is already
-% monospace, don't change it; that way, we respect @kbdinputstyle.  But
-% if it isn't monospace, then use \tt.
-%
-\def\key#1{{\setupmarkupstyle{key}%
-  \nohyphenation
-  \ifmonospace\else\tt\fi
-  #1}\null}
-
-% ctrl is no longer a Texinfo command.
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
 \def\tclose#1{%
   {%
     % Change normal interword space to be same as for the current font.
@@ -2482,7 +2477,7 @@ end
 % We *must* turn on hyphenation at `-' and `_' in @code.
 % Otherwise, it is too hard to avoid overfull hboxes
 % in the Emacs manual, the Library manual, etc.
-
+%
 % Unfortunately, TeX uses one parameter (\hyphenchar) to control
 % both hyphenation at - and hyphenation within words.
 % We must therefore turn them both off (\tclose does that)
@@ -2501,7 +2496,7 @@ end
      \let-\codedash
      \let_\codeunder
     \else
-     \let-\realdash
+     \let-\normaldash
      \let_\realunder
     \fi
     \codex
@@ -2510,7 +2505,7 @@ end
 
 \def\codex #1{\tclose{#1}\endgroup}
 
-\def\realdash{-}
+\def\normaldash{-}
 \def\codedash{-\discretionary{}{}{}}
 \def\codeunder{%
   % this is all so @math{@code{var_name}+1} can work.  In math mode, _
@@ -2525,9 +2520,9 @@ end
 }
 
 % An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__.  This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general.  @allowcodebreaks provides a way to control this.
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
 %
 \newif\ifallowcodebreaks  \allowcodebreakstrue
 
@@ -2546,6 +2541,13 @@ end
   \fi\fi
 }
 
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
 % second argument specifying the text to display and an optional third
 % arg as text to display instead of (rather than in addition to) the url
@@ -2692,10 +2694,6 @@ end
   \let\email=\uref
 \fi
 
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
-
 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
@@ -2719,16 +2717,36 @@ end
 % Default is `distinct'.
 \kbdinputstyle distinct
 
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
 
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
 
 % @clicksequence{File @click{} Open ...}
 \def\clicksequence#1{\begingroup #1\endgroup}
@@ -2836,6 +2854,9 @@ end
   }
 }
 
+% ctrl is no longer a Texinfo command, but leave this definition for fun.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
 % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
 % Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
 % except specified as a normal braced arg, so no newlines to worry about.
@@ -3126,12 +3147,17 @@ end
   % hopefully nobody will notice/care.
   \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
   \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
-  \ifx\curfontstyle\bfstylename
-    % bold:
-    \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = ectt\ecsize \space at \nominalsize
   \else
-    % regular:
-    \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
   \fi
   \thisecfont
 }
@@ -3244,6 +3270,20 @@ end
   \finishedtitlepagetrue
 }
 
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first.  Because
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+%
+\def\raggedtitlesettings{%
+  \rmisbold
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
 % Macros to be used within @titlepage:
 
 \let\subtitlerm=\tenrm
@@ -3251,7 +3291,7 @@ end
 
 \parseargdef\title{%
   \checkenv\titlepage
-  \leftline{\titlefonts\rmisbold #1}
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
   % print a rule at the page bottom also.
   \finishedtitlepagefalse
   \vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -4148,7 +4188,7 @@ end
     % ..., but we might end up with active ones in the argument if
     % we're called from @code, as @code{@value{foo-bar_}}, though.
     % So \let them to their normal equivalents.
-    \let-\realdash \let_\normalunderscore
+    \let-\normaldash \let_\normalunderscore
   }
 }
 
@@ -4188,7 +4228,7 @@ end
 }
 \def\ifsetfail{\doignore{ifset}}
 
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
 % defined with @set, or has been undefined with @clear.
 %
 % The `\else' inside the `\doifset' parameter is a trick to reuse the
@@ -4199,6 +4239,35 @@ end
 \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
 \def\ifclearfail{\doignore{ifclear}}
 
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+%
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
 % @dircategory CATEGORY  -- specify a category of the dir file
 % which this file should belong to.  Ignore this in TeX.
 \let\dircategory=\comment
@@ -4435,6 +4504,7 @@ end
   \definedummyword\guillemetright
   \definedummyword\guilsinglleft
   \definedummyword\guilsinglright
+  \definedummyword\lbracechar
   \definedummyword\leq
   \definedummyword\minus
   \definedummyword\ogonek
@@ -4447,6 +4517,7 @@ end
   \definedummyword\quoteleft
   \definedummyword\quoteright
   \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
   \definedummyword\result
   \definedummyword\textdegree
   %
@@ -4498,6 +4569,7 @@ end
   \definedummyword\t
   %
   % Commands that take arguments.
+  \definedummyword\abbr
   \definedummyword\acronym
   \definedummyword\anchor
   \definedummyword\cite
@@ -4509,7 +4581,9 @@ end
   \definedummyword\emph
   \definedummyword\env
   \definedummyword\file
+  \definedummyword\image
   \definedummyword\indicateurl
+  \definedummyword\inforef
   \definedummyword\kbd
   \definedummyword\key
   \definedummyword\math
@@ -4556,7 +4630,10 @@ end
   % content at all.  So for index sorting, we map @{ and @} to strings
   % starting with |, since that ASCII character is between ASCII { and }.
   \def\{{|a}%
+  \def\lbracechar{|a}%
+  %
   \def\}{|b}%
+  \def\rbracechar{|b}%
   %
   % Non-English letters.
   \def\AA{AA}%
@@ -4732,10 +4809,9 @@ end
 %
 % ..., ready, GO:
 %
-\def\safewhatsit#1{%
-\ifhmode
+\def\safewhatsit#1{\ifhmode
   #1%
-\else
+ \else
   % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
   \whatsitskip = \lastskip
   \edef\lastskipmacro{\the\lastskip}%
@@ -4759,7 +4835,6 @@ end
     % to re-insert the same penalty (values >10000 are used for various
     % signals); since we just inserted a non-discardable item, any
     % following glue (such as a \parskip) would be a breakpoint.  For example:
-    %
     %   @deffn deffn-whatever
     %   @vindex index-whatever
     %   Description.
@@ -4772,8 +4847,7 @@ end
     % (the whatsit from the \write), so we must insert a \nobreak.
     \nobreak\vskip\whatsitskip
   \fi
-\fi
-}
+\fi}
 
 % The index entry written in the file actually looks like
 %  \entry {sortstring}{page}{topic}
@@ -5520,14 +5594,6 @@ end
 
 % Define @majorheading, @heading and @subheading
 
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-%       1) We use \vbox rather than the earlier \line to permit
-%          overlong headings to fold.
-%       2) \hyphenpenalty is set to 10000 because hyphenation in a
-%          heading is obnoxious; this forbids it.
-%       3) Likewise, headings look best if no \parindent is used, and
-%          if justification is not attempted.  Hence \raggedright.
-
 \def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
   \parsearg\chapheadingzzz
@@ -5535,10 +5601,8 @@ end
 
 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
 \def\chapheadingzzz#1{%
-  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\ptexraggedright
-                    \rmisbold #1\hfill}}%
-  \bigskip \par\penalty 200\relax
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
   \suppressfirstparagraphindent
 }
 
@@ -5697,8 +5761,7 @@ end
     %
     % Typeset the actual heading.
     \nobreak % Avoid page breaks at the interline glue.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
-          \hangindent=\wd0 \centerparametersmaybe
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
   \nobreak\bigskip % no page break after a chapter title
@@ -5720,18 +5783,18 @@ end
 \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
 %
 \def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\ptexraggedright
-                       \rmisbold #1\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
 }
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
 \par\penalty 5000 %
 }
 \def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt
-                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
 }
 \def\CHAPFopen{%
   \global\let\chapmacro=\chfopen
@@ -5876,14 +5939,15 @@ end
   %
   % We'll almost certainly start a paragraph next, so don't let that
   % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
   \vskip-\parskip
   %
-  % This is purely so the last item on the list is a known \penalty >
-  % 10000.  This is so \startdefun can avoid allowing breakpoints after
-  % section headings.  Otherwise, it would insert a valid breakpoint between:
-  %   @section sec-whatever
-  %   @deffn def-whatever
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
   \penalty 10001
 }
 
@@ -6303,7 +6367,7 @@ end
   % If this cartouche directly follows a sectioning command, we need the
   % \parskip glue (backspaced over by default) or the cartouche can
   % collide with the section heading.
-  \ifnum\lastpenalty>10000 \vskip\parskip \fi
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
   %
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
@@ -6496,16 +6560,9 @@ end
 \makedispenvdef{quotation}{\quotationstart}
 %
 \def\quotationstart{%
-  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
-  \parindent=0pt
-  %
-  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
   \ifx\nonarrowing\relax
-    \advance\leftskip by \lispnarrowing
     \advance\rightskip by \lispnarrowing
-    \exdentamount = \lispnarrowing
-  \else
-    \let\nonarrowing = \relax
   \fi
   \parsearg\quotationlabel
 }
@@ -6531,6 +6588,32 @@ end
   \fi
 }
 
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+%
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
 
 % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
 % If we want to allow any <char> as delimiter,
@@ -7009,7 +7092,10 @@ end
   \df \sl \hyphenchar\font=0
   %
   % On the other hand, if an argument has two dashes (for instance), we
-  % want a way to get ttsl.  Let's try @var for that.
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
   \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
   #1%
   \sl\hyphenchar\font=45
@@ -7793,7 +7879,7 @@ end
   \fi\fi
 }
 
-
+% 
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
 % node name, #4 the name of the Info file, #5 the name of the printed
@@ -7803,16 +7889,21 @@ end
 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
 \def\ref#1{\xrefX[#1,,,,,,,]}
 %
-\newbox\topbox
+\newbox\toprefbox
 \newbox\printedrefnamebox
+\newbox\infofilenamebox
 \newbox\printedmanualbox
 %
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
   %
+  % Get args without leading/trailing spaces.
   \def\printedrefname{\ignorespaces #3}%
   \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
   %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
   \def\printedmanual{\ignorespaces #5}%
   \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
   %
@@ -7845,12 +7936,20 @@ end
   \ifpdf
     {\indexnofonts
      \turnoffactive
+     \makevalueexpandable
      % This expands tokens, so do it after making catcode changes, so _
-     % etc. don't get their TeX definitions.
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
      \getfilename{#4}%
      %
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
      \edef\pdfxrefdest{#1}%
-     \txiescapepdf\pdfxrefdest
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
+     \else
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
      %
      \leavevmode
      \startlink attr{/Border [0 0 0]}%
@@ -7883,7 +7982,7 @@ end
       \printedrefname
     \fi
     %
-    % if the user also gave the printed manual name (fifth arg), append
+    % If the user also gave the printed manual name (fifth arg), append
     % "in MANUALNAME".
     \ifdim \wd\printedmanualbox > 0pt
       \space \putwordin{} \cite{\printedmanual}%
@@ -7898,32 +7997,20 @@ end
     % this is a loss.  Therefore, we give the text of the node name
     % again, so it is as if TeX is seeing it for the first time.
     %
-    % Cross-manual reference.  Only include the "Section ``foo'' in" if
-    % the foo is neither missing or Top.  Thus, @xref{,,,foo,The Foo Manual}
-    % outputs simply "see The Foo Manual".
     \ifdim \wd\printedmanualbox > 0pt
-      % What is the 7sp about?  The idea is that we also want to omit
-      % the Section part if we would be printing "Top", since they are
-      % clearly trying to refer to the whole manual.  But, this being
-      % TeX, we can't easily compare strings while ignoring the possible
-      % spaces before and after in the input.  By adding the arbitrary
-      % 7sp, we make it much less likely that a real node name would
-      % happen to have the same width as "Top" (e.g., in a monospaced font).
-      % I hope it will never happen in practice.
+      % Cross-manual reference with a printed manual name.
       %
-      % For the same basic reason, we retypeset the "Top" at every
-      % reference, since the current font is indeterminate.
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
+    %
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
       %
-      \setbox\topbox = \hbox{Top\kern7sp}%
-      \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
-      \ifdim \wd2 > 7sp
-        \ifdim \wd2 = \wd\topbox \else
-          \putwordSection{} ``\printedrefname'' \putwordin{}\space
-        \fi
-      \fi
-      \cite{\printedmanual}%
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
     \else
-      % Reference in this manual.
+      % Reference within this manual.
       %
       % _ (for example) has to be the character _ for the purposes of the
       % control sequence corresponding to the node, but it has to expand
@@ -7944,11 +8031,37 @@ end
       %
       % output the `page 3'.
       \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
-    \fi
+    \fi\fi
   \fi
   \endlink
 \endgroup}
 
+% Output a cross-manual xref to #1.  Used just above (twice).
+%
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+%
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+%
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+%
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
 % This macro is called from \xrefX for the `[nodename]' part of xref
 % output.  It's a separate macro only so it can be changed more easily,
 % since square brackets don't work well in some documents.  Particularly
@@ -8316,7 +8429,7 @@ end
   it from ftp://tug.org/tex/epsf.tex.}
 %
 \def\image#1{%
-  \ifx\epsfbox\thisiundefined
+  \ifx\epsfbox\thisisundefined
     \ifwarnednoepsf \else
       \errhelp = \noepsfhelp
       \errmessage{epsf.tex not found, images will be ignored}%
@@ -8340,6 +8453,13 @@ end
   % If the image is by itself, center it.
   \ifvmode
     \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
     \nobreak\medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
@@ -8349,9 +8469,13 @@ end
   \fi
   %
   % Leave vertical mode so that indentation from an enclosing
-  % environment such as @quotation is respected.  On the other hand, if
-  % it's at the top level, we don't want the normal paragraph indentation.
-  \noindent
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
   %
   % Output the image.
   \ifpdf
@@ -8363,7 +8487,10 @@ end
     \epsfbox{#1.eps}%
   \fi
   %
-  \ifimagevmode \medskip \fi  % space after the standalone image
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi
+  \ifx\centersub\centerV \egroup \fi
 \endgroup}
 
 
@@ -9866,22 +9993,26 @@ directory should work if nowhere else does.}
 @gdef@otherbackslash{@let\=@realbackslash}
 
 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
+% the literal character `\'.  Also revert - to its normal character, in
+% case the active - from code has slipped in.
 %
-@def@normalturnoffactive{%
-  @let"=@normaldoublequote
-  @let$=@normaldollar %$ font-lock fix
-  @let+=@normalplus
-  @let<=@normalless
-  @let>=@normalgreater
-  @let\=@normalbackslash
-  @let^=@normalcaret
-  @let_=@normalunderscore
-  @let|=@normalverticalbar
-  @let~=@normaltilde
-  @markupsetuplqdefault
-  @markupsetuprqdefault
-  @unsepspaces
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let\=@normalbackslash
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
 }
 
 % Make _ and + \other characters, temporarily.