1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-12-23 10:29:58 +01:00

Merge ccid_driver_improvement branch. (backport)

* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.

* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289.  Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
This commit is contained in:
NIIBE Yutaka 2012-01-06 13:50:21 +09:00
parent 2f90d09902
commit 262a3b2336
2 changed files with 110 additions and 32 deletions

View File

@ -2339,7 +2339,7 @@ check_ccid_keypad (int slot, int command, int pin_mode,
static int
ccid_keypad_verify (int slot, int class, int ins, int p0, int p1,
ccid_keypad_operation (int slot, int class, int ins, int p0, int p1,
struct pininfo_s *pininfo)
{
unsigned char apdu[4];
@ -2411,8 +2411,8 @@ open_ccid_reader (const char *portstr)
reader_table[slot].check_keypad = check_ccid_keypad;
reader_table[slot].dump_status_reader = dump_ccid_reader_status;
reader_table[slot].set_progress_cb = set_progress_cb_ccid_reader;
reader_table[slot].keypad_verify = ccid_keypad_verify;
reader_table[slot].keypad_modify = NULL;
reader_table[slot].keypad_verify = ccid_keypad_operation;
reader_table[slot].keypad_modify = ccid_keypad_operation;
/* Our CCID reader code does not support T=0 at all, thus reset the
flag. */
reader_table[slot].is_t0 = 0;

View File

@ -210,7 +210,8 @@ enum {
VENDOR_OMNIKEY= 0x076b,
VENDOR_GEMPC = 0x08e6,
VENDOR_KAAN = 0x0d46,
VENDOR_FSIJ = 0x234B
VENDOR_FSIJ = 0x234b,
VENDOR_VASCO = 0x1a44
};
/* Some product ids. */
@ -220,7 +221,7 @@ enum {
#define SCM_SCR3320 0x5117
#define SCM_SPR532 0xe003
#define CHERRY_ST2000 0x003e
#define VASCO_920 0x0920
/* A list and a table with special transport descriptions. */
enum {
@ -2589,8 +2590,8 @@ ccid_transceive_apdu_level (ccid_driver_t handle,
/* The maximum length for a short APDU T=1 block is 261. For an
extended APDU T=1 block the maximum length 65544; however
extended APDU exchange level is not yet supported. */
if (apdulen > 261)
extended APDU exchange level is not fully supported yet. */
if (apdulen > 289)
return CCID_DRIVER_ERR_INV_VALUE; /* Invalid length. */
msg[0] = PC_to_RDR_XfrBlock;
@ -2613,8 +2614,51 @@ ccid_transceive_apdu_level (ccid_driver_t handle,
if (rc)
return rc;
if (msg[9] == 1)
{
size_t total_msglen = msglen;
while (1)
{
unsigned char status;
msg = recv_buffer + total_msglen;
msg[0] = PC_to_RDR_XfrBlock;
msg[5] = 0; /* slot */
msg[6] = seqno = handle->seqno++;
msg[7] = bwi; /* bBWI */
msg[8] = 0x10; /* Request next data block */
msg[9] = 0;
set_msg_len (msg, 0);
msglen = 10;
rc = bulk_out (handle, msg, msglen, 0);
if (rc)
return rc;
rc = bulk_in (handle, msg, sizeof recv_buffer - total_msglen, &msglen,
RDR_to_PC_DataBlock, seqno, 5000, 0);
if (rc)
return rc;
status = msg[9];
memmove (msg, msg+10, msglen - 10);
total_msglen += msglen - 10;
if (total_msglen >= sizeof recv_buffer)
return CCID_DRIVER_ERR_OUT_OF_CORE;
if (status == 0x02)
break;
}
apdu = recv_buffer + 10;
apdulen = total_msglen - 10;
}
else
{
apdu = msg + 10;
apdulen = msglen - 10;
}
if (resp)
{
@ -3058,7 +3102,7 @@ ccid_transceive_secure (ccid_driver_t handle,
if (apdu_buflen >= 4 && apdu_buf[1] == 0x20 && (handle->has_pinpad & 1))
;
else if (apdu_buflen >= 4 && apdu_buf[1] == 0x24 && (handle->has_pinpad & 2))
return CCID_DRIVER_ERR_NOT_SUPPORTED; /* Not yet by our code. */
;
else
return CCID_DRIVER_ERR_NO_KEYPAD;
@ -3086,6 +3130,9 @@ ccid_transceive_secure (ccid_driver_t handle,
case VENDOR_SCM: /* Tested with SPR 532. */
case VENDOR_KAAN: /* Tested with KAAN Advanced (1.02). */
break;
case VENDOR_VASCO: /* Tested with DIGIPASS 920 */
pinlen_max = 15;
break;
case VENDOR_CHERRY:
/* The CHERRY XX44 keyboard echos an asterisk for each entered
character on the keyboard channel. We use a special variant
@ -3120,7 +3167,8 @@ ccid_transceive_secure (ccid_driver_t handle,
msg[7] = 0; /* bBWI */
msg[8] = 0; /* RFU */
msg[9] = 0; /* RFU */
msg[10] = 0; /* Perform PIN verification. */
msg[10] = apdu_buf[1] == 0x20 ? 0 : 1;
/* Perform PIN verification or PIN modification. */
msg[11] = 0; /* Timeout in seconds. */
msg[12] = 0x82; /* bmFormatString: Byte, pos=0, left, ASCII. */
if (handle->id_vendor == VENDOR_SCM)
@ -3139,28 +3187,58 @@ ccid_transceive_secure (ccid_driver_t handle,
Units are bytes, position is 0. */
}
/* The following is a little endian word. */
msg[15] = pinlen_max; /* wPINMaxExtraDigit-Maximum. */
msg[16] = pinlen_min; /* wPINMaxExtraDigit-Minimum. */
msglen = 15;
if (apdu_buf[1] == 0x24)
{
msg[msglen++] = 0; /* bInsertionOffsetOld */
msg[msglen++] = 0; /* bInsertionOffsetNew */
}
msg[17] = 0x02; /* bEntryValidationCondition:
/* The following is a little endian word. */
msg[msglen++] = pinlen_max; /* wPINMaxExtraDigit-Maximum. */
msg[msglen++] = pinlen_min; /* wPINMaxExtraDigit-Minimum. */
if (apdu_buf[1] == 0x24)
msg[msglen++] = apdu_buf[2] == 0 ? 0x03 : 0x01;
/* bConfirmPIN
* 0x00: new PIN once
* 0x01: new PIN twice (confirmation)
* 0x02: old PIN and new PIN once
* 0x03: old PIN and new PIN twice (confirmation)
*/
msg[msglen] = 0x02; /* bEntryValidationCondition:
Validation key pressed */
if (pinlen_min && pinlen_max && pinlen_min == pinlen_max)
msg[17] |= 0x01; /* Max size reached. */
msg[18] = 0xff; /* bNumberMessage: Default. */
msg[19] = 0x09; /* wLangId-Low: English FIXME: use the first entry. */
msg[20] = 0x04; /* wLangId-High. */
msg[21] = 0; /* bMsgIndex. */
msg[msglen] |= 0x01; /* Max size reached. */
msglen++;
if (apdu_buf[1] == 0x20)
msg[msglen++] = 0xff; /* bNumberMessage: Default. */
else
msg[msglen++] = 0x03; /* bNumberMessage. */
msg[msglen++] = 0x09; /* wLangId-Low: English FIXME: use the first entry. */
msg[msglen++] = 0x04; /* wLangId-High. */
if (apdu_buf[1] == 0x20)
msg[msglen++] = 0; /* bMsgIndex. */
else
{
msg[msglen++] = 0; /* bMsgIndex1. */
msg[msglen++] = 1; /* bMsgIndex2. */
msg[msglen++] = 2; /* bMsgIndex3. */
}
/* bTeoProlog follows: */
msg[22] = handle->nonnull_nad? ((1 << 4) | 0): 0;
msg[23] = ((handle->t1_ns & 1) << 6); /* I-block */
msg[24] = 0; /* The apdulen will be filled in by the reader. */
msg[msglen++] = handle->nonnull_nad? ((1 << 4) | 0): 0;
msg[msglen++] = ((handle->t1_ns & 1) << 6); /* I-block */
msg[msglen++] = 0; /* The apdulen will be filled in by the reader. */
/* APDU follows: */
msg[25] = apdu_buf[0]; /* CLA */
msg[26] = apdu_buf[1]; /* INS */
msg[27] = apdu_buf[2]; /* P1 */
msg[28] = apdu_buf[3]; /* P2 */
msglen = 29;
msg[msglen++] = apdu_buf[0]; /* CLA */
msg[msglen++] = apdu_buf[1]; /* INS */
msg[msglen++] = apdu_buf[2]; /* P1 */
msg[msglen++] = apdu_buf[3]; /* P2 */
if (cherry_mode)
msg[msglen++] = 0;
/* An EDC is not required. */