1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-11-04 20:38:50 +01:00
gnupg/g10/cardglue.c

936 lines
23 KiB
C
Raw Normal View History

/* cardglue.c - mainly dispatcher for card related functions.
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 20:18:36 +02:00
* Copyright (C) 2003, 2004 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*/
#include <config.h>
#ifndef ENABLE_CARD_SUPPORT
#error not configured for card support.
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <stdarg.h>
#include <assert.h>
#include "options.h"
#include "packet.h"
#include "errors.h"
#include "memory.h"
#include "util.h"
#include "main.h"
#include "status.h"
#include "ttyio.h"
#include "i18n.h"
#include "cardglue.h"
#include "apdu.h"
#include "app-common.h"
struct ctrl_ctx_s {
int (*status_cb)(void *opaque, const char *line);
void *status_cb_arg;
};
static char *default_reader_port;
static APP current_app;
/* Create a serialno/fpr string from the serial number and the secret
key. caller must free the returned string. There is no error
return. [Taken from 1.9's keyid.c]*/
char *
serialno_and_fpr_from_sk (const unsigned char *sn, size_t snlen,
PKT_secret_key *sk)
{
unsigned char fpr[MAX_FINGERPRINT_LEN];
size_t fprlen;
char *buffer, *p;
int i;
fingerprint_from_sk (sk, fpr, &fprlen);
buffer = p = xmalloc (snlen*2 + 1 + fprlen*2 + 1);
for (i=0; i < snlen; i++, p+=2)
sprintf (p, "%02X", sn[i]);
*p++ = '/';
for (i=0; i < fprlen; i++, p+=2)
sprintf (p, "%02X", fpr[i]);
*p = 0;
return buffer;
}
/* Send a line with status information via assuan and escape all given
buffers. The variable elements are pairs of (char *, size_t),
terminated with a (NULL, 0). */
void
send_status_info (CTRL ctrl, const char *keyword, ...)
{
va_list arg_ptr;
const unsigned char *value;
size_t valuelen;
char buf[950], *p;
size_t n;
va_start (arg_ptr, keyword);
p = buf;
n = 0;
valuelen = strlen (keyword);
for ( ; valuelen && n < DIM (buf)-2; n++, valuelen--, keyword++)
*p++ = *keyword;
while ( (value = va_arg (arg_ptr, const unsigned char *)) )
{
valuelen = va_arg (arg_ptr, size_t);
if (!valuelen)
continue; /* empty buffer */
if (n)
{
*p++ = ' ';
n++;
}
for ( ; valuelen && n < DIM (buf)-2; n++, valuelen--, value++)
{
if (*value < ' ' || *value == '+')
{
sprintf (p, "%%%02X", *value);
p += 3;
}
else if (*value == ' ')
*p++ = '+';
else
*p++ = *value;
}
}
*p = 0;
ctrl->status_cb (ctrl->status_cb_arg, buf);
va_end (arg_ptr);
}
void gcry_md_hash_buffer (int algo, void *digest,
const void *buffer, size_t length)
{
MD_HANDLE h = md_open (algo, 0);
if (!h)
BUG();
md_write (h, (byte *) buffer, length);
md_final (h);
memcpy (digest, md_read (h, algo), md_digest_length (algo));
md_close (h);
}
/* This is a limited version of the one in 1.9 but it should be
sufficient here. */
void
log_printf (const char *fmt, ...)
{
va_list arg_ptr;
va_start (arg_ptr, fmt);
vfprintf (log_stream (), fmt, arg_ptr);
va_end (arg_ptr);
}
/* Print a hexdump of BUFFER. With TEXT of NULL print just the raw
dump, with TEXT just an empty string, print a trailing linefeed,
otherwise print an entire debug line. */
void
log_printhex (const char *text, const void *buffer, size_t length)
{
if (text && *text)
log_debug ("%s ", text);
if (length)
{
const unsigned char *p = buffer;
log_printf ("%02X", *p);
for (length--, p++; length--; p++)
log_printf (" %02X", *p);
}
if (text)
log_printf ("\n");
}
void
app_set_default_reader_port (const char *portstr)
{
xfree (default_reader_port);
default_reader_port = portstr? xstrdup (portstr): NULL;
}
void
card_set_reader_port (const char *portstr)
{
app_set_default_reader_port (portstr);
}
/* Retrieve the serial number and the time of the last update of the
card. The serial number is returned as a malloced string (hex
encoded) in SERIAL and the time of update is returned in STAMP. If
no update time is available the returned value is 0. Caller must
free SERIAL unless the function returns an error. */
int
app_get_serial_and_stamp (APP app, char **serial, time_t *stamp)
{
unsigned char *buf, *p;
int i;
if (!app || !serial || !stamp)
return gpg_error (GPG_ERR_INV_VALUE);
*serial = NULL;
*stamp = 0; /* not available */
buf = xtrymalloc (app->serialnolen * 2 + 1);
if (!buf)
return gpg_error_from_errno (errno);
for (p=buf, i=0; i < app->serialnolen; p +=2, i++)
sprintf (p, "%02X", app->serialno[i]);
*p = 0;
*serial = buf;
return 0;
}
/* Release the card info structure. */
void
agent_release_card_info (struct agent_card_info_s *info)
{
int i;
if (!info)
return;
xfree (info->serialno); info->serialno = NULL;
xfree (info->disp_name); info->disp_name = NULL;
xfree (info->disp_lang); info->disp_lang = NULL;
xfree (info->pubkey_url); info->pubkey_url = NULL;
xfree (info->login_data); info->login_data = NULL;
info->fpr1valid = info->fpr2valid = info->fpr3valid = 0;
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 20:18:36 +02:00
info->cafpr1valid = info->cafpr2valid = info->cafpr3valid = 0;
for (i=0; i < 4; i++)
{
xfree (info->private_do[i]);
info->private_do[i] = NULL;
}
}
/* Open the current card and select the openpgp application. Return
an APP context handle to be used for further procesing or NULL on
error or if no OpenPGP application exists.*/
static APP
open_card (void)
{
int slot = -1;
int rc;
APP app;
int did_shutdown = 0;
card_close ();
retry:
if (did_shutdown)
apdu_reset (slot);
else
{
slot = apdu_open_reader (default_reader_port);
if (slot == -1)
{
log_error ("card reader not available\n");
return NULL;
}
}
app = xcalloc (1, sizeof *app);
app->slot = slot;
rc = app_select_openpgp (app);
if (rc && !opt.batch)
{
write_status_text (STATUS_CARDCTRL, "1");
did_shutdown = !!apdu_shutdown_reader (slot);
if ( cpr_get_answer_okay_cancel ("cardctrl.insert_card.okay",
_("Please insert the card and hit return or enter 'c' to cancel: "),
1) )
{
if (!did_shutdown)
apdu_close_reader (slot);
xfree (app);
goto retry;
}
}
if (rc)
{
write_status_text (STATUS_CARDCTRL, "4");
log_info ("selecting openpgp failed: %s\n", gpg_strerror (rc));
apdu_close_reader (slot);
xfree (app);
return NULL;
}
app->initialized = 1;
current_app = app;
if (is_status_enabled () )
{
int i;
char *p, *buf;
buf = xmalloc (5 + app->serialnolen * 2 + 1);
p = stpcpy (buf, "3 ");
for (i=0; i < app->serialnolen; p +=2, i++)
sprintf (p, "%02X", app->serialno[i]);
write_status_text (STATUS_CARDCTRL, buf);
xfree (buf);
}
return app;
}
void
card_close (void)
{
if (current_app)
{
APP app = current_app;
current_app = NULL;
apdu_close_reader (app->slot);
xfree (app);
}
}
/* Check that the serial number of the current card (as described by
APP) matches SERIALNO. If there is no match and we are not in
batch mode, present a prompt to insert the desired card. The
function return 0 is the present card is okay, -1 if the user
selected to insert a new card or an error value. Note that the
card context will be closed in all cases except for 0 as return
value and if it was possible to merely shutdown the reader. */
static int
check_card_serialno (APP app, const char *serialno)
{
const char *s;
int ask = 0;
int n;
for (s = serialno, n=0; *s != '/' && hexdigitp (s); s++, n++)
;
if (n != 32)
{
log_error ("invalid serial number in keyring detected\n");
return gpg_error (GPG_ERR_INV_ID);
}
if (app->serialnolen != 16)
ask = 1;
for (s = serialno, n=0; !ask && n < 16; s += 2, n++)
if (app->serialno[n] != xtoi_2 (s))
ask = 1;
if (ask)
{
char buf[5+32+1];
int did_shutdown = 0;
if (current_app && !apdu_shutdown_reader (current_app->slot))
did_shutdown = 1;
else
card_close ();
tty_printf (_("Please remove the current card and "
"insert the one with serial number:\n"
" %.*s\n"), 32, serialno);
sprintf (buf, "1 %.32s", serialno);
write_status_text (STATUS_CARDCTRL, buf);
if ( cpr_get_answer_okay_cancel ("cardctrl.change_card.okay",
_("Hit return when ready "
"or enter 'c' to cancel: "),
1) )
{
card_close ();
return -1;
}
if (did_shutdown)
apdu_reset (current_app->slot);
else
card_close ();
return gpg_error (GPG_ERR_INV_ID);
}
return 0;
}
/* Return a new malloced string by unescaping the string S. Escaping
is percent escaping and '+'/space mapping. A binary nul will
silently be replaced by a 0xFF. Function returns NULL to indicate
an out of memory status. */
static char *
unescape_status_string (const unsigned char *s)
{
char *buffer, *d;
buffer = d = xmalloc (strlen (s)+1);
while (*s)
{
if (*s == '%' && s[1] && s[2])
{
s++;
*d = xtoi_2 (s);
if (!*d)
*d = '\xff';
d++;
s += 2;
}
else if (*s == '+')
{
*d++ = ' ';
s++;
}
else
*d++ = *s++;
}
*d = 0;
return buffer;
}
/* Take a 20 byte hexencoded string and put it into the the provided
20 byte buffer FPR in binary format. */
static int
unhexify_fpr (const char *hexstr, unsigned char *fpr)
{
const char *s;
int n;
for (s=hexstr, n=0; hexdigitp (s); s++, n++)
;
if (*s || (n != 40))
return 0; /* no fingerprint (invalid or wrong length). */
n /= 2;
for (s=hexstr, n=0; *s; s += 2, n++)
fpr[n] = xtoi_2 (s);
return 1; /* okay */
}
/* Take the serial number from LINE and return it verbatim in a newly
allocated string. We make sure that only hex characters are
returned. */
static char *
store_serialno (const char *line)
{
const char *s;
char *p;
for (s=line; hexdigitp (s); s++)
;
p = xmalloc (s + 1 - line);
memcpy (p, line, s-line);
p[s-line] = 0;
return p;
}
static int
learn_status_cb (void *opaque, const char *line)
{
struct agent_card_info_s *parm = opaque;
const char *keyword = line;
int keywordlen;
int i;
/* log_debug ("got status line `%s'\n", line); */
for (keywordlen=0; *line && !spacep (line); line++, keywordlen++)
;
while (spacep (line))
line++;
if (keywordlen == 8 && !memcmp (keyword, "SERIALNO", keywordlen))
{
xfree (parm->serialno);
parm->serialno = store_serialno (line);
}
else if (keywordlen == 9 && !memcmp (keyword, "DISP-NAME", keywordlen))
{
xfree (parm->disp_name);
parm->disp_name = unescape_status_string (line);
}
else if (keywordlen == 9 && !memcmp (keyword, "DISP-LANG", keywordlen))
{
xfree (parm->disp_lang);
parm->disp_lang = unescape_status_string (line);
}
else if (keywordlen == 8 && !memcmp (keyword, "DISP-SEX", keywordlen))
{
parm->disp_sex = *line == '1'? 1 : *line == '2' ? 2: 0;
}
else if (keywordlen == 10 && !memcmp (keyword, "PUBKEY-URL", keywordlen))
{
xfree (parm->pubkey_url);
parm->pubkey_url = unescape_status_string (line);
}
else if (keywordlen == 10 && !memcmp (keyword, "LOGIN-DATA", keywordlen))
{
xfree (parm->login_data);
parm->login_data = unescape_status_string (line);
}
else if (keywordlen == 11 && !memcmp (keyword, "SIG-COUNTER", keywordlen))
{
parm->sig_counter = strtoul (line, NULL, 0);
}
else if (keywordlen == 10 && !memcmp (keyword, "CHV-STATUS", keywordlen))
{
char *p, *buf;
buf = p = unescape_status_string (line);
if (buf)
{
while (spacep (p))
p++;
parm->chv1_cached = atoi (p);
while (*p && !spacep (p))
p++;
while (spacep (p))
p++;
for (i=0; *p && i < 3; i++)
{
parm->chvmaxlen[i] = atoi (p);
while (*p && !spacep (p))
p++;
while (spacep (p))
p++;
}
for (i=0; *p && i < 3; i++)
{
parm->chvretry[i] = atoi (p);
while (*p && !spacep (p))
p++;
while (spacep (p))
p++;
}
xfree (buf);
}
}
else if (keywordlen == 7 && !memcmp (keyword, "KEY-FPR", keywordlen))
{
int no = atoi (line);
while (* line && !spacep (line))
line++;
while (spacep (line))
line++;
if (no == 1)
parm->fpr1valid = unhexify_fpr (line, parm->fpr1);
else if (no == 2)
parm->fpr2valid = unhexify_fpr (line, parm->fpr2);
else if (no == 3)
parm->fpr3valid = unhexify_fpr (line, parm->fpr3);
}
else if (keywordlen == 8 && !memcmp (keyword, "KEY-TIME", keywordlen))
{
int no = atoi (line);
while (* line && !spacep (line))
line++;
while (spacep (line))
line++;
if (no == 1)
parm->fpr1time = strtoul (line, NULL, 10);
else if (no == 2)
parm->fpr2time = strtoul (line, NULL, 10);
else if (no == 3)
parm->fpr3time = strtoul (line, NULL, 10);
}
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 20:18:36 +02:00
else if (keywordlen == 6 && !memcmp (keyword, "CA-FPR", keywordlen))
{
int no = atoi (line);
while (*line && !spacep (line))
line++;
while (spacep (line))
line++;
if (no == 1)
parm->cafpr1valid = unhexify_fpr (line, parm->cafpr1);
else if (no == 2)
parm->cafpr2valid = unhexify_fpr (line, parm->cafpr2);
else if (no == 3)
parm->cafpr3valid = unhexify_fpr (line, parm->cafpr3);
}
else if (keywordlen == 12 && !memcmp (keyword, "PRIVATE-DO-", 11)
&& strchr ("1234", keyword[11]))
{
int no = keyword[11] - '1';
assert (no >= 0 && no <= 3);
xfree (parm->private_do[no]);
parm->private_do[no] = unescape_status_string (line);
}
return 0;
}
/* Return card info. */
int
agent_learn (struct agent_card_info_s *info)
{
APP app;
int rc;
struct ctrl_ctx_s ctrl;
time_t stamp;
char *serial;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
memset (info, 0, sizeof *info);
memset (&ctrl, 0, sizeof ctrl);
ctrl.status_cb = learn_status_cb;
ctrl.status_cb_arg = info;
rc = app_get_serial_and_stamp (app, &serial, &stamp);
if (!rc)
{
send_status_info (&ctrl, "SERIALNO", serial, strlen(serial), NULL, 0);
xfree (serial);
rc = app->fnc.learn_status (app, &ctrl);
}
return rc;
}
/* Get an attribite from the card. Make sure info is initialized. */
int
agent_scd_getattr (const char *name, struct agent_card_info_s *info)
{
APP app;
struct ctrl_ctx_s ctrl;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
ctrl.status_cb = learn_status_cb;
ctrl.status_cb_arg = info;
return app->fnc.getattr (app, &ctrl, name);
}
static int
pin_cb (void *opaque, const char *info, char **retstr)
{
char *value;
int canceled;
int isadmin = 0;
int newpin = 0;
const char *again_text = NULL;
const char *ends, *s;
*retstr = NULL;
log_debug ("asking for PIN '%s'\n", info);
/* We use a special prefix to check whether the Admin PIN has been
requested. */
if (info && *info =='|' && (ends=strchr (info+1, '|')))
{
for (s=info+1; s < ends; s++)
{
if (*s == 'A')
isadmin = 1;
else if (*s == 'N')
newpin = 1;
}
info = ends+1;
}
again:
if (is_status_enabled())
write_status_text (STATUS_NEED_PASSPHRASE_PIN,
isadmin? "OPENPGP 3" : "OPENPGP 1");
value = ask_passphrase (info, again_text,
newpin && isadmin? "passphrase.adminpin.new.ask" :
newpin? "passphrase.pin.new.ask" :
isadmin? "passphrase.adminpin.ask" :
"passphrase.pin.ask",
newpin && isadmin? _("Enter New Admin PIN: ") :
newpin? _("Enter New PIN: ") :
isadmin? _("Enter Admin PIN: ")
: _("Enter PIN: "),
&canceled);
again_text = NULL;
if (!value && canceled)
return -1;
else if (!value)
return G10ERR_GENERAL;
if (newpin)
{
char *value2;
value2 = ask_passphrase (info, NULL,
"passphrase.pin.repeat",
_("Repeat this PIN: "),
&canceled);
if (!value && canceled)
{
xfree (value);
return -1;
}
else if (!value)
{
xfree (value);
return G10ERR_GENERAL;
}
if (strcmp (value, value2))
{
again_text = N_("PIN not correctly repeated; try again");
xfree (value2);
xfree (value);
value = NULL;
goto again;
}
xfree (value2);
}
*retstr = value;
return 0;
}
/* Send a SETATTR command to the SCdaemon. */
int
agent_scd_setattr (const char *name,
const unsigned char *value, size_t valuelen)
{
APP app;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
return app->fnc.setattr (app, name, pin_cb, NULL, value, valuelen);
}
static int
genkey_status_cb (void *opaque, const char *line)
{
struct agent_card_genkey_s *parm = opaque;
const char *keyword = line;
int keywordlen;
/* log_debug ("got status line `%s'\n", line); */
for (keywordlen=0; *line && !spacep (line); line++, keywordlen++)
;
while (spacep (line))
line++;
if (keywordlen == 7 && !memcmp (keyword, "KEY-FPR", keywordlen))
{
parm->fprvalid = unhexify_fpr (line, parm->fpr);
}
if (keywordlen == 8 && !memcmp (keyword, "KEY-DATA", keywordlen))
{
MPI a;
const char *name = line;
char *buf;
while (*line && !spacep (line))
line++;
while (spacep (line))
line++;
buf = xmalloc ( 2 + strlen (line) + 1);
strcpy (stpcpy (buf, "0x"), line);
a = mpi_alloc (300);
if( mpi_fromstr (a, buf) )
log_error ("error parsing received key data\n");
else if (*name == 'n' && spacep (name+1))
parm->n = a;
else if (*name == 'e' && spacep (name+1))
parm->e = a;
else
{
log_info ("unknown parameter name in received key data\n");
mpi_free (a);
}
xfree (buf);
}
else if (keywordlen == 14 && !memcmp (keyword,"KEY-CREATED-AT", keywordlen))
{
parm->created_at = (u32)strtoul (line, NULL, 10);
}
return 0;
}
/* Send a GENKEY command to the SCdaemon. */
int
agent_scd_genkey (struct agent_card_genkey_s *info, int keyno, int force)
{
APP app;
char keynostr[20];
struct ctrl_ctx_s ctrl;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
memset (info, 0, sizeof *info);
sprintf (keynostr, "%d", keyno);
ctrl.status_cb = genkey_status_cb;
ctrl.status_cb_arg = info;
return app->fnc.genkey (app, &ctrl, keynostr,
force? 1:0,
pin_cb, NULL);
}
/* Send a PKSIGN command to the SCdaemon. */
int
agent_scd_pksign (const char *serialno, int hashalgo,
const unsigned char *indata, size_t indatalen,
unsigned char **r_buf, size_t *r_buflen)
{
APP app;
int rc;
*r_buf = NULL;
*r_buflen = 0;
retry:
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
/* Check that the card's serialnumber is as required.*/
rc = check_card_serialno (app, serialno);
if (rc == -1)
goto retry;
if (rc)
return rc;
return app->fnc.sign (app, serialno, hashalgo,
pin_cb, NULL,
indata, indatalen,
r_buf, r_buflen);
}
/* Send a PKDECRYPT command to the SCdaemon. */
int
agent_scd_pkdecrypt (const char *serialno,
const unsigned char *indata, size_t indatalen,
unsigned char **r_buf, size_t *r_buflen)
{
APP app;
int rc;
*r_buf = NULL;
*r_buflen = 0;
retry:
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
/* Check that the card's serialnumber is as required.*/
rc = check_card_serialno (app, serialno);
if (rc == -1)
goto retry;
if (rc)
return rc;
return app->fnc.decipher (app, serialno,
pin_cb, NULL,
indata, indatalen,
r_buf, r_buflen);
}
/* Change the PIN of an OpenPGP card or reset the retry counter. */
int
agent_scd_change_pin (int chvno)
{
APP app;
char chvnostr[20];
int reset = 0;
reset = (chvno >= 100);
chvno %= 100;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
sprintf (chvnostr, "%d", chvno);
return app->fnc.change_pin (app, NULL, chvnostr, reset,
pin_cb, NULL);
}
/* Perform a CHECKPIN operation. SERIALNO should be the serial
number of the card - optionally followed by the fingerprint;
however the fingerprint is ignored here. */
int
agent_scd_checkpin (const char *serialnobuf)
{
APP app;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
return app->fnc.check_pin (app, serialnobuf, pin_cb, NULL);
}
/* Wrapper to call the store key helper function of app-openpgp.c. */
int
agent_openpgp_storekey (int keyno,
unsigned char *template, size_t template_len,
time_t created_at,
const unsigned char *m, size_t mlen,
const unsigned char *e, size_t elen)
{
APP app;
app = current_app? current_app : open_card ();
if (!app)
return gpg_error (GPG_ERR_CARD);
return app_openpgp_storekey (app, keyno, template, template_len,
created_at, m, mlen, e, elen,
pin_cb, NULL);
}