1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-12-22 10:19:57 +01:00
gnupg/g10/apdu.h

141 lines
5.4 KiB
C
Raw Normal View History

/* apdu.h - ISO 7816 APDU functions and low level I/O
* Copyright (C) 2003, 2008 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
2007-10-23 10:48:09 +00:00
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
2007-10-23 10:48:09 +00:00
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
* $Id$
*/
#ifndef APDU_H
#define APDU_H
/* ISO 7816 values for the statusword are defined here because they
should not be visible to the users of the actual ISO command
API. */
enum {
SW_MORE_DATA = 0x6100, /* Note: that the low byte must be
masked of.*/
SW_EOF_REACHED = 0x6282,
SW_TERM_STATE = 0x6285, /* Selected file is in termination state. */
SW_EEPROM_FAILURE = 0x6581,
SW_WRONG_LENGTH = 0x6700,
SW_SM_NOT_SUP = 0x6882, /* Secure Messaging is not supported. */
SW_CC_NOT_SUP = 0x6884, /* Command Chaining is not supported. */
SW_CHV_WRONG = 0x6982,
SW_CHV_BLOCKED = 0x6983,
SW_USE_CONDITIONS = 0x6985,
SW_BAD_PARAMETER = 0x6a80, /* (in the data field) */
SW_NOT_SUPPORTED = 0x6a81,
SW_FILE_NOT_FOUND = 0x6a82,
SW_RECORD_NOT_FOUND = 0x6a83,
SW_BAD_LC = 0x6a87, /* Lc does not match command or p1/p2. */
SW_REF_NOT_FOUND = 0x6a88,
SW_BAD_P0_P1 = 0x6b00,
SW_EXACT_LENGTH = 0x6c00,
SW_INS_NOT_SUP = 0x6d00,
SW_CLA_NOT_SUP = 0x6e00,
SW_SUCCESS = 0x9000,
/* The follwoing statuswords are no real ones but used to map host
OS errors into status words. A status word is 16 bit so that
those values can't be issued by a card. */
SW_HOST_OUT_OF_CORE = 0x10001, /* No way yet to differentiate
between errnos on a failed malloc. */
SW_HOST_INV_VALUE = 0x10002,
SW_HOST_INCOMPLETE_CARD_RESPONSE = 0x10003,
SW_HOST_NO_DRIVER = 0x10004,
SW_HOST_NOT_SUPPORTED = 0x10005,
SW_HOST_LOCKING_FAILED= 0x10006,
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
SW_HOST_BUSY = 0x10007,
SW_HOST_NO_CARD = 0x10008,
SW_HOST_CARD_INACTIVE = 0x10009,
SW_HOST_CARD_IO_ERROR = 0x1000a,
SW_HOST_GENERAL_ERROR = 0x1000b,
SW_HOST_NO_READER = 0x1000c,
2005-10-27 09:14:27 +00:00
SW_HOST_ABORTED = 0x1000d,
SW_HOST_NO_KEYPAD = 0x1000e,
SW_HOST_ALREADY_CONNECTED = 0x1000f
};
#define SW_EXACT_LENGTH_P(a) (((a)&~0xff) == SW_EXACT_LENGTH)
/* Bit flags for the card status. */
#define APDU_CARD_USABLE (1) /* Card is present and ready for use. */
#define APDU_CARD_PRESENT (2) /* Card is just present. */
#define APDU_CARD_ACTIVE (4) /* Card is active. */
/* Note , that apdu_open_reader returns no status word but -1 on error. */
int apdu_open_reader (const char *portstr);
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
int apdu_open_remote_reader (const char *portstr,
const unsigned char *cookie, size_t length,
int (*readfnc) (void *opaque,
void *buffer, size_t size),
void *readfnc_value,
int (*writefnc) (void *opaque,
const void *buffer, size_t size),
void *writefnc_value,
void (*closefnc) (void *opaque),
void *closefnc_value);
int apdu_shutdown_reader (int slot);
int apdu_close_reader (int slot);
void apdu_prepare_exit (void);
int apdu_enum_reader (int slot, int *used);
unsigned char *apdu_get_atr (int slot, size_t *atrlen);
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
const char *apdu_strerror (int rc);
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
/* These APDU functions return status words. */
int apdu_connect (int slot);
int apdu_disconnect (int slot);
int apdu_set_progress_cb (int slot, gcry_handler_progress_t cb, void *cb_arg);
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
int apdu_activate (int slot);
int apdu_reset (int slot);
int apdu_get_status (int slot, int hang,
unsigned int *status, unsigned int *changed);
2005-10-27 09:14:27 +00:00
int apdu_check_keypad (int slot, int command, int pin_mode,
int pinlen_min, int pinlen_max, int pin_padlen);
int apdu_send_simple (int slot, int extended_mode,
int class, int ins, int p0, int p1,
int lc, const char *data);
2005-10-27 09:14:27 +00:00
int apdu_send_simple_kp (int slot, int class, int ins, int p0, int p1,
int lc, const char *data,
int pin_mode,
int pinlen_min, int pinlen_max, int pin_padlen);
int apdu_send (int slot, int extended_mode,
int class, int ins, int p0, int p1, int lc, const char *data,
unsigned char **retbuf, size_t *retbuflen);
int apdu_send_le (int slot, int extended_mode,
int class, int ins, int p0, int p1,
int lc, const char *data, int le,
unsigned char **retbuf, size_t *retbuflen);
int apdu_send_direct (int slot, size_t extended_length,
* README: Doc --disable-card-support and --without-readline. * configure.ac: Check for readline. Make enable-card-support the default. New option --without-readline. Allow the use of either the development or the stable libusb. * cardglue.h: Add members for CA fingerprints. * cardglue.c (agent_release_card_info): Invalid them. (learn_status_cb): Store them. * app-common.h, app-openpgp.c, iso7816.c, iso7816.h * apdu.c, apdu.h, ccid-driver.c, ccid-driver.h * card-util.c: Updated from current gnupg-1.9. * ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New. * ccid-driver.c (ccid_open_reader): Support the stable 0.1 version of libusb. (ccid_get_atr): Handle short messages. * apdu.c (my_rapdu_get_status): Implemented. * apdu.c: Include <signal.h>. * apdu.c (reader_table_s): Add function pointers for the backends. (apdu_close_reader, apdu_get_status, apdu_activate) (send_apdu): Make use of them. (new_reader_slot): Intialize them to NULL. (dump_ccid_reader_status, ct_dump_reader_status): New. (dump_pcsc_reader_status): New. (open_ct_reader, open_pcsc_reader, open_ccid_reader) (open_osc_reader, open_rapdu_reader): Intialize function pointers. (ct_activate_card, ct_send_apdu, pcsc_send_apdu, osc_send_apdu) (error_string): Removed. Replaced by apdu_strerror. (get_ccid_error_string): Removed. (ct_activate_card): Remove the unused loop. (reset_ct_reader): Implemented. (ct_send_apdu): Activate the card if not yet done. (pcsc_send_apdu): Ditto. * ccid-driver.h: Add error codes. * ccid-driver.c: Implement more or less proper error codes all over the place. * apdu.c (apdu_send_direct): New. (get_ccid_error_string): Add some error code mappings. (send_apdu): Pass error codes along for drivers already supporting them. (host_sw_string): New. (get_ccid_error_string): Use above. (send_apdu_ccid): Reset the reader if it has not yet been done. (open_ccid_reader): Don't care if the ATR can't be read. (apdu_activate_card): New. (apdu_strerror): New. (dump_reader_status): Only enable it with opt.VERBOSE. * iso7816.c (map_sw): Add mappings for the new error codes. * apdu.c (open_ct_reader, open_pcsc_reader, open_ccid_reader) (reset_ccid_reader, open_osc_reader): Call dump_reader_status only in verbose mode. * app-openpgp.c (do_getattr): Fix for sending CA-FPR. * app-openpgp.c (app_openpgp_readkey): Fixed check for valid exponent. * app-openpgp.c (do_setattr): Sync FORCE_CHV1. * card-util.c (change_login): Kludge to allow reading data from a file. (card_edit): Pass ARG_STRING to change_login. (card_status): Print CA fingerprints. (change_cafpr): New. (card_edit): New command CAFPR. * errors.h (G10ERR_NO_CARD, G10ERR_CANCELED): New error codes. * errors.c (g10_errstr): New error codes G10ERR_NO_CARD, G10ERR_CANCELED.
2004-09-09 18:18:36 +00:00
const unsigned char *apdudata, size_t apdudatalen,
int handle_more,
unsigned char **retbuf, size_t *retbuflen);
#endif /*APDU_H*/