1
0
mirror of git://git.gnupg.org/gnupg.git synced 2024-12-22 10:19:57 +01:00
gnupg/scd/apdu.c

3033 lines
88 KiB
C
Raw Normal View History

/* apdu.c - ISO 7816 APDU functions and low level I/O
* Copyright (C) 2003, 2004 Free Software Foundation, Inc.
*
* This file is part of GnuPG.
*
* GnuPG is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* GnuPG is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*
* $Id$
*/
/* NOTE: This module is also used by other software, thus the use of
the macro USE_GNU_PTH is mandatory. For GnuPG this macro is
guaranteed to be defined true. */
#include <config.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <assert.h>
#include <signal.h>
#ifdef USE_GNU_PTH
# include <unistd.h>
# include <fcntl.h>
2006-10-17 14:34:42 +00:00
# include <pth.h>
#endif
/* If requested include the definitions for the remote APDU protocol
code. */
#ifdef USE_G10CODE_RAPDU
#include "rapdu.h"
#endif /*USE_G10CODE_RAPDU*/
2004-03-16 10:49:37 +00:00
#if defined(GNUPG_SCD_MAIN_HEADER)
#include GNUPG_SCD_MAIN_HEADER
#elif GNUPG_MAJOR_VERSION == 1
/* This is used with GnuPG version < 1.9. The code has been source
copied from the current GnuPG >= 1.9 and is maintained over
there. */
#include "options.h"
#include "errors.h"
#include "memory.h"
#include "util.h"
#include "i18n.h"
#include "cardglue.h"
#else /* GNUPG_MAJOR_VERSION != 1 */
#include "scdaemon.h"
#endif /* GNUPG_MAJOR_VERSION != 1 */
#include "apdu.h"
#include "dynload.h"
#include "ccid-driver.h"
2005-11-28 11:52:25 +00:00
/* Due to conflicting use of threading libraries we usually can't link
against libpcsclite. Instead we use a wrapper program. */
#ifdef USE_GNU_PTH
2005-11-28 11:52:25 +00:00
#if !defined(HAVE_W32_SYSTEM) && !defined(__CYGWIN__)
#define NEED_PCSC_WRAPPER 1
#endif
#endif
#define MAX_READER 4 /* Number of readers we support concurrently. */
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
#define DLSTDCALL __stdcall
#else
#define DLSTDCALL
#endif
#ifdef _POSIX_OPEN_MAX
#define MAX_OPEN_FDS _POSIX_OPEN_MAX
#else
#define MAX_OPEN_FDS 20
#endif
2005-11-28 11:52:25 +00:00
/* Helper to pass patrameters related to keypad based operations. */
struct pininfo_s
{
int mode;
int minlen;
int maxlen;
int padlen;
};
/* A structure to collect information pertaining to one reader
slot. */
struct reader_table_s {
int used; /* True if slot is used. */
2003-08-05 17:11:04 +00:00
unsigned short port; /* Port number: 0 = unused, 1 - dev/tty */
/* Function pointers intialized to the various backends. */
int (*close_reader)(int);
int (*shutdown_reader)(int);
int (*reset_reader)(int);
int (*get_status_reader)(int, unsigned int *);
int (*send_apdu_reader)(int,unsigned char *,size_t,
2005-11-28 11:52:25 +00:00
unsigned char *, size_t *, struct pininfo_s *);
int (*check_keypad)(int, int, int, int, int, int);
void (*dump_status_reader)(int);
struct {
ccid_driver_t handle;
} ccid;
2003-08-05 17:11:04 +00:00
struct {
unsigned long context;
unsigned long card;
unsigned long protocol;
#ifdef NEED_PCSC_WRAPPER
int req_fd;
int rsp_fd;
pid_t pid;
#endif /*NEED_PCSC_WRAPPER*/
2003-08-05 17:11:04 +00:00
} pcsc;
#ifdef USE_G10CODE_RAPDU
struct {
rapdu_t handle;
} rapdu;
#endif /*USE_G10CODE_RAPDU*/
char *rdrname; /* Name of the connected reader or NULL if unknown. */
int last_status;
int status;
int is_t0; /* True if we know that we are running T=0. */
unsigned char atr[33];
size_t atrlen; /* A zero length indicates that the ATR has
not yet been read; i.e. the card is not
ready for use. */
unsigned int change_counter;
#ifdef USE_GNU_PTH
int lock_initialized;
pth_mutex_t lock;
#endif
};
typedef struct reader_table_s *reader_table_t;
/* A global table to keep track of active readers. */
static struct reader_table_s reader_table[MAX_READER];
/* ct API function pointer. */
static char (* DLSTDCALL CT_init) (unsigned short ctn, unsigned short Pn);
static char (* DLSTDCALL CT_data) (unsigned short ctn, unsigned char *dad,
unsigned char *sad, unsigned short lc,
unsigned char *cmd, unsigned short *lr,
unsigned char *rsp);
static char (* DLSTDCALL CT_close) (unsigned short ctn);
2003-08-05 17:11:04 +00:00
/* PC/SC constants and function pointer. */
#define PCSC_SCOPE_USER 0
#define PCSC_SCOPE_TERMINAL 1
#define PCSC_SCOPE_SYSTEM 2
#define PCSC_SCOPE_GLOBAL 3
2003-08-05 17:11:04 +00:00
#define PCSC_PROTOCOL_T0 1
#define PCSC_PROTOCOL_T1 2
#define PCSC_PROTOCOL_RAW 4
2003-08-05 17:11:04 +00:00
#define PCSC_SHARE_EXCLUSIVE 1
#define PCSC_SHARE_SHARED 2
#define PCSC_SHARE_DIRECT 3
#define PCSC_LEAVE_CARD 0
#define PCSC_RESET_CARD 1
#define PCSC_UNPOWER_CARD 2
#define PCSC_EJECT_CARD 3
#define PCSC_UNKNOWN 0x0001
#define PCSC_ABSENT 0x0002 /* Card is absent. */
#define PCSC_PRESENT 0x0004 /* Card is present. */
#define PCSC_SWALLOWED 0x0008 /* Card is present and electrical connected. */
#define PCSC_POWERED 0x0010 /* Card is powered. */
#define PCSC_NEGOTIABLE 0x0020 /* Card is awaiting PTS. */
#define PCSC_SPECIFIC 0x0040 /* Card is ready for use. */
#define PCSC_STATE_UNAWARE 0x0000 /* Want status. */
#define PCSC_STATE_IGNORE 0x0001 /* Ignore this reader. */
#define PCSC_STATE_CHANGED 0x0002 /* State has changed. */
#define PCSC_STATE_UNKNOWN 0x0004 /* Reader unknown. */
#define PCSC_STATE_UNAVAILABLE 0x0008 /* Status unavailable. */
#define PCSC_STATE_EMPTY 0x0010 /* Card removed. */
#define PCSC_STATE_PRESENT 0x0020 /* Card inserted. */
#define PCSC_STATE_ATRMATCH 0x0040 /* ATR matches card. */
#define PCSC_STATE_EXCLUSIVE 0x0080 /* Exclusive Mode. */
#define PCSC_STATE_INUSE 0x0100 /* Shared mode. */
#define PCSC_STATE_MUTE 0x0200 /* Unresponsive card. */
/* Some PC/SC error codes. */
#define PCSC_E_CANCELLED 0x80100002
#define PCSC_E_CANT_DISPOSE 0x8010000E
#define PCSC_E_INSUFFICIENT_BUFFER 0x80100008
#define PCSC_E_INVALID_ATR 0x80100015
#define PCSC_E_INVALID_HANDLE 0x80100003
#define PCSC_E_INVALID_PARAMETER 0x80100004
#define PCSC_E_INVALID_TARGET 0x80100005
#define PCSC_E_INVALID_VALUE 0x80100011
#define PCSC_E_NO_MEMORY 0x80100006
#define PCSC_E_UNKNOWN_READER 0x80100009
#define PCSC_E_TIMEOUT 0x8010000A
#define PCSC_E_SHARING_VIOLATION 0x8010000B
#define PCSC_E_NO_SMARTCARD 0x8010000C
#define PCSC_E_UNKNOWN_CARD 0x8010000D
#define PCSC_E_PROTO_MISMATCH 0x8010000F
#define PCSC_E_NOT_READY 0x80100010
#define PCSC_E_SYSTEM_CANCELLED 0x80100012
#define PCSC_E_NOT_TRANSACTED 0x80100016
#define PCSC_E_READER_UNAVAILABLE 0x80100017
#define PCSC_W_REMOVED_CARD 0x80100069
/* The PC/SC error is defined as a long as per specs. Due to left
shifts bit 31 will get sign extended. We use this mask to fix
it. */
#define PCSC_ERR_MASK(a) ((a) & 0xffffffff)
struct pcsc_io_request_s
{
unsigned long protocol;
2003-08-05 17:11:04 +00:00
unsigned long pci_len;
};
typedef struct pcsc_io_request_s *pcsc_io_request_t;
struct pcsc_readerstate_s
{
const char *reader;
void *user_data;
unsigned long current_state;
unsigned long event_state;
unsigned long atrlen;
unsigned char atr[33];
};
typedef struct pcsc_readerstate_s *pcsc_readerstate_t;
long (* DLSTDCALL pcsc_establish_context) (unsigned long scope,
const void *reserved1,
const void *reserved2,
unsigned long *r_context);
long (* DLSTDCALL pcsc_release_context) (unsigned long context);
long (* DLSTDCALL pcsc_list_readers) (unsigned long context,
const char *groups,
char *readers, unsigned long*readerslen);
long (* DLSTDCALL pcsc_get_status_change) (unsigned long context,
unsigned long timeout,
pcsc_readerstate_t readerstates,
unsigned long nreaderstates);
long (* DLSTDCALL pcsc_connect) (unsigned long context,
const char *reader,
unsigned long share_mode,
unsigned long preferred_protocols,
unsigned long *r_card,
unsigned long *r_active_protocol);
long (* DLSTDCALL pcsc_reconnect) (unsigned long card,
unsigned long share_mode,
unsigned long preferred_protocols,
unsigned long initialization,
unsigned long *r_active_protocol);
long (* DLSTDCALL pcsc_disconnect) (unsigned long card,
unsigned long disposition);
long (* DLSTDCALL pcsc_status) (unsigned long card,
char *reader, unsigned long *readerlen,
unsigned long *r_state,
unsigned long *r_protocol,
unsigned char *atr, unsigned long *atrlen);
long (* DLSTDCALL pcsc_begin_transaction) (unsigned long card);
2006-09-06 16:35:52 +00:00
long (* DLSTDCALL pcsc_end_transaction) (unsigned long card,
unsigned long disposition);
long (* DLSTDCALL pcsc_transmit) (unsigned long card,
const pcsc_io_request_t send_pci,
const unsigned char *send_buffer,
unsigned long send_len,
pcsc_io_request_t recv_pci,
unsigned char *recv_buffer,
unsigned long *recv_len);
long (* DLSTDCALL pcsc_set_timeout) (unsigned long context,
unsigned long timeout);
2003-08-05 17:11:04 +00:00
/* Prototypes. */
static int pcsc_get_status (int slot, unsigned int *status);
/*
Helper
*/
2003-08-05 17:11:04 +00:00
/* Find an unused reader slot for PORTSTR and put it into the reader
table. Return -1 on error or the index into the reader table. */
static int
new_reader_slot (void)
{
int i, reader = -1;
for (i=0; i < MAX_READER; i++)
{
2003-08-05 17:11:04 +00:00
if (!reader_table[i].used && reader == -1)
reader = i;
}
if (reader == -1)
{
log_error ("new_reader_slot: out of slots\n");
return -1;
}
#ifdef USE_GNU_PTH
if (!reader_table[reader].lock_initialized)
{
if (!pth_mutex_init (&reader_table[reader].lock))
{
log_error ("error initializing mutex: %s\n", strerror (errno));
return -1;
}
reader_table[reader].lock_initialized = 1;
}
#endif /*USE_GNU_PTH*/
reader_table[reader].close_reader = NULL;
reader_table[reader].shutdown_reader = NULL;
reader_table[reader].reset_reader = NULL;
reader_table[reader].get_status_reader = NULL;
reader_table[reader].send_apdu_reader = NULL;
2005-11-28 11:52:25 +00:00
reader_table[reader].check_keypad = NULL;
reader_table[reader].dump_status_reader = NULL;
reader_table[reader].used = 1;
reader_table[reader].last_status = 0;
reader_table[reader].is_t0 = 1;
#ifdef NEED_PCSC_WRAPPER
reader_table[reader].pcsc.req_fd = -1;
reader_table[reader].pcsc.rsp_fd = -1;
reader_table[reader].pcsc.pid = (pid_t)(-1);
#endif
return reader;
}
static void
dump_reader_status (int slot)
{
if (!opt.verbose)
return;
if (reader_table[slot].dump_status_reader)
reader_table[slot].dump_status_reader (slot);
if (reader_table[slot].status != -1
&& reader_table[slot].atrlen)
2003-08-05 17:11:04 +00:00
{
log_info ("slot %d: ATR=", slot);
log_printhex ("", reader_table[slot].atr, reader_table[slot].atrlen);
2003-08-05 17:11:04 +00:00
}
}
static const char *
host_sw_string (long err)
{
switch (err)
2003-08-05 17:11:04 +00:00
{
case 0: return "okay";
case SW_HOST_OUT_OF_CORE: return "out of core";
case SW_HOST_INV_VALUE: return "invalid value";
case SW_HOST_NO_DRIVER: return "no driver";
case SW_HOST_NOT_SUPPORTED: return "not supported";
case SW_HOST_LOCKING_FAILED: return "locking failed";
case SW_HOST_BUSY: return "busy";
case SW_HOST_NO_CARD: return "no card";
case SW_HOST_CARD_INACTIVE: return "card inactive";
case SW_HOST_CARD_IO_ERROR: return "card I/O error";
case SW_HOST_GENERAL_ERROR: return "general error";
case SW_HOST_NO_READER: return "no reader";
case SW_HOST_ABORTED: return "aborted";
2005-11-28 11:52:25 +00:00
case SW_HOST_NO_KEYPAD: return "no keypad";
default: return "unknown host status error";
2003-08-05 17:11:04 +00:00
}
}
2003-08-05 17:11:04 +00:00
const char *
apdu_strerror (int rc)
{
switch (rc)
{
case SW_EOF_REACHED : return "eof reached";
case SW_EEPROM_FAILURE : return "eeprom failure";
case SW_WRONG_LENGTH : return "wrong length";
case SW_CHV_WRONG : return "CHV wrong";
case SW_CHV_BLOCKED : return "CHV blocked";
case SW_USE_CONDITIONS : return "use conditions not satisfied";
case SW_BAD_PARAMETER : return "bad parameter";
case SW_NOT_SUPPORTED : return "not supported";
case SW_FILE_NOT_FOUND : return "file not found";
case SW_RECORD_NOT_FOUND:return "record not found";
case SW_REF_NOT_FOUND : return "reference not found";
case SW_BAD_P0_P1 : return "bad P0 or P1";
case SW_INS_NOT_SUP : return "instruction not supported";
case SW_CLA_NOT_SUP : return "class not supported";
case SW_SUCCESS : return "success";
default:
if ((rc & ~0x00ff) == SW_MORE_DATA)
return "more data available";
if ( (rc & 0x10000) )
return host_sw_string (rc);
return "unknown status error";
}
}
/*
ct API Interface
*/
static const char *
2003-08-05 17:11:04 +00:00
ct_error_string (long err)
{
switch (err)
{
case 0: return "okay";
case -1: return "invalid data";
case -8: return "ct error";
case -10: return "transmission error";
case -11: return "memory allocation error";
case -128: return "HTSI error";
default: return "unknown CT-API error";
}
}
static void
ct_dump_reader_status (int slot)
{
log_info ("reader slot %d: %s\n", slot,
reader_table[slot].status == 1? "Processor ICC present" :
reader_table[slot].status == 0? "Memory ICC present" :
"ICC not present" );
}
/* Wait for the card in SLOT and activate it. Return a status word
error or 0 on success. */
static int
ct_activate_card (int slot)
{
int rc;
unsigned char dad[1], sad[1], cmd[11], buf[256];
unsigned short buflen;
/* Check whether card has been inserted. */
dad[0] = 1; /* Destination address: CT. */
sad[0] = 2; /* Source address: Host. */
cmd[0] = 0x20; /* Class byte. */
cmd[1] = 0x13; /* Request status. */
cmd[2] = 0x00; /* From kernel. */
cmd[3] = 0x80; /* Return card's DO. */
cmd[4] = 0x00;
buflen = DIM(buf);
rc = CT_data (slot, dad, sad, 5, cmd, &buflen, buf);
if (rc || buflen < 2 || buf[buflen-2] != 0x90)
{
log_error ("ct_activate_card: can't get status of reader %d: %s\n",
slot, ct_error_string (rc));
return SW_HOST_CARD_IO_ERROR;
}
/* Connected, now activate the card. */
dad[0] = 1; /* Destination address: CT. */
sad[0] = 2; /* Source address: Host. */
cmd[0] = 0x20; /* Class byte. */
cmd[1] = 0x12; /* Request ICC. */
cmd[2] = 0x01; /* From first interface. */
cmd[3] = 0x01; /* Return card's ATR. */
cmd[4] = 0x00;
buflen = DIM(buf);
rc = CT_data (slot, dad, sad, 5, cmd, &buflen, buf);
if (rc || buflen < 2 || buf[buflen-2] != 0x90)
{
log_error ("ct_activate_card(%d): activation failed: %s\n",
slot, ct_error_string (rc));
if (!rc)
log_printhex (" received data:", buf, buflen);
return SW_HOST_CARD_IO_ERROR;
}
/* Store the type and the ATR. */
if (buflen - 2 > DIM (reader_table[0].atr))
{
log_error ("ct_activate_card(%d): ATR too long\n", slot);
return SW_HOST_CARD_IO_ERROR;
}
reader_table[slot].status = buf[buflen - 1];
memcpy (reader_table[slot].atr, buf, buflen - 2);
reader_table[slot].atrlen = buflen - 2;
return 0;
}
static int
close_ct_reader (int slot)
{
CT_close (slot);
reader_table[slot].used = 0;
return 0;
}
static int
reset_ct_reader (int slot)
{
/* FIXME: Check is this is sufficient do do a reset. */
return ct_activate_card (slot);
}
static int
ct_get_status (int slot, unsigned int *status)
{
*status = 1|2|4; /* FIXME */
return 0;
return SW_HOST_NOT_SUPPORTED;
}
/* Actually send the APDU of length APDULEN to SLOT and return a
maximum of *BUFLEN data in BUFFER, the actual retruned size will be
set to BUFLEN. Returns: CT API error code. */
static int
ct_send_apdu (int slot, unsigned char *apdu, size_t apdulen,
2005-11-28 11:52:25 +00:00
unsigned char *buffer, size_t *buflen, struct pininfo_s *pininfo)
{
int rc;
unsigned char dad[1], sad[1];
unsigned short ctbuflen;
/* If we don't have an ATR, we need to reset the reader first. */
if (!reader_table[slot].atrlen
&& (rc = reset_ct_reader (slot)))
return rc;
dad[0] = 0; /* Destination address: Card. */
sad[0] = 2; /* Source address: Host. */
ctbuflen = *buflen;
if (DBG_CARD_IO)
log_printhex (" CT_data:", apdu, apdulen);
rc = CT_data (slot, dad, sad, apdulen, apdu, &ctbuflen, buffer);
*buflen = ctbuflen;
return rc? SW_HOST_CARD_IO_ERROR: 0;
}
/* Open a reader and return an internal handle for it. PORT is a
non-negative value with the port number of the reader. USB readers
do have port numbers starting at 32769. */
static int
open_ct_reader (int port)
{
int rc, reader;
if (port < 0 || port > 0xffff)
{
log_error ("open_ct_reader: invalid port %d requested\n", port);
return -1;
}
reader = new_reader_slot ();
if (reader == -1)
return reader;
reader_table[reader].port = port;
rc = CT_init (reader, (unsigned short)port);
if (rc)
{
log_error ("apdu_open_ct_reader failed on port %d: %s\n",
port, ct_error_string (rc));
reader_table[reader].used = 0;
return -1;
}
/* Only try to activate the card. */
rc = ct_activate_card (reader);
if (rc)
{
reader_table[reader].atrlen = 0;
rc = 0;
}
reader_table[reader].close_reader = close_ct_reader;
reader_table[reader].reset_reader = reset_ct_reader;
reader_table[reader].get_status_reader = ct_get_status;
reader_table[reader].send_apdu_reader = ct_send_apdu;
2005-11-28 11:52:25 +00:00
reader_table[reader].check_keypad = NULL;
reader_table[reader].dump_status_reader = ct_dump_reader_status;
dump_reader_status (reader);
return reader;
}
/*
PC/SC Interface
*/
#ifdef NEED_PCSC_WRAPPER
static int
writen (int fd, const void *buf, size_t nbytes)
{
size_t nleft = nbytes;
int nwritten;
/* log_printhex (" writen:", buf, nbytes); */
while (nleft > 0)
{
#ifdef USE_GNU_PTH
nwritten = pth_write (fd, buf, nleft);
#else
nwritten = write (fd, buf, nleft);
#endif
if (nwritten < 0 && errno == EINTR)
continue;
if (nwritten < 0)
return -1;
nleft -= nwritten;
buf = (const char*)buf + nwritten;
}
return 0;
}
/* Read up to BUFLEN bytes from FD and return the number of bytes
actually read in NREAD. Returns -1 on error or 0 on success. */
static int
readn (int fd, void *buf, size_t buflen, size_t *nread)
{
size_t nleft = buflen;
int n;
/* void *orig_buf = buf; */
while (nleft > 0)
{
#ifdef USE_GNU_PTH
n = pth_read (fd, buf, nleft);
#else
n = read (fd, buf, nleft);
#endif
if (n < 0 && errno == EINTR)
continue;
if (n < 0)
return -1; /* read error. */
if (!n)
break; /* EOF */
nleft -= n;
buf = (char*)buf + n;
}
if (nread)
*nread = buflen - nleft;
/* log_printhex (" readn:", orig_buf, *nread); */
return 0;
}
#endif /*NEED_PCSC_WRAPPER*/
2003-08-05 17:11:04 +00:00
static const char *
pcsc_error_string (long err)
{
const char *s;
if (!err)
return "okay";
if ((err & 0x80100000) != 0x80100000)
return "invalid PC/SC error code";
err &= 0xffff;
switch (err)
{
case 0x0002: s = "cancelled"; break;
case 0x000e: s = "can't dispose"; break;
case 0x0008: s = "insufficient buffer"; break;
2003-08-05 17:11:04 +00:00
case 0x0015: s = "invalid ATR"; break;
case 0x0003: s = "invalid handle"; break;
case 0x0004: s = "invalid parameter"; break;
2003-08-05 17:11:04 +00:00
case 0x0005: s = "invalid target"; break;
case 0x0011: s = "invalid value"; break;
case 0x0006: s = "no memory"; break;
case 0x0013: s = "comm error"; break;
case 0x0001: s = "internal error"; break;
case 0x0014: s = "unknown error"; break;
case 0x0007: s = "waited too long"; break;
2003-08-05 17:11:04 +00:00
case 0x0009: s = "unknown reader"; break;
case 0x000a: s = "timeout"; break;
case 0x000b: s = "sharing violation"; break;
2003-08-05 17:11:04 +00:00
case 0x000c: s = "no smartcard"; break;
case 0x000d: s = "unknown card"; break;
case 0x000f: s = "proto mismatch"; break;
case 0x0010: s = "not ready"; break;
case 0x0012: s = "system cancelled"; break;
2003-08-05 17:11:04 +00:00
case 0x0016: s = "not transacted"; break;
case 0x0017: s = "reader unavailable"; break;
case 0x0065: s = "unsupported card"; break;
case 0x0066: s = "unresponsive card"; break;
case 0x0067: s = "unpowered card"; break;
case 0x0068: s = "reset card"; break;
case 0x0069: s = "removed card"; break;
case 0x006a: s = "inserted card"; break;
case 0x001f: s = "unsupported feature"; break;
case 0x0019: s = "PCI too small"; break;
case 0x001a: s = "reader unsupported"; break;
case 0x001b: s = "duplicate reader"; break;
case 0x001c: s = "card unsupported"; break;
case 0x001d: s = "no service"; break;
case 0x001e: s = "service stopped"; break;
2003-08-05 17:11:04 +00:00
default: s = "unknown PC/SC error code"; break;
}
return s;
}
/* Map PC/SC error codes to our special host status words. */
static int
pcsc_error_to_sw (long ec)
{
int rc;
switch ( PCSC_ERR_MASK (ec) )
{
case 0: rc = 0; break;
case PCSC_E_CANCELLED: rc = SW_HOST_ABORTED; break;
case PCSC_E_NO_MEMORY: rc = SW_HOST_OUT_OF_CORE; break;
case PCSC_E_TIMEOUT: rc = SW_HOST_CARD_IO_ERROR; break;
case PCSC_E_SHARING_VIOLATION: rc = SW_HOST_LOCKING_FAILED; break;
case PCSC_E_NO_SMARTCARD: rc = SW_HOST_NO_CARD; break;
case PCSC_W_REMOVED_CARD: rc = SW_HOST_NO_CARD; break;
case PCSC_E_INVALID_TARGET:
case PCSC_E_INVALID_VALUE:
case PCSC_E_INVALID_HANDLE:
case PCSC_E_INVALID_PARAMETER:
case PCSC_E_INSUFFICIENT_BUFFER: rc = SW_HOST_INV_VALUE; break;
default: rc = SW_HOST_GENERAL_ERROR; break;
}
return rc;
}
static void
dump_pcsc_reader_status (int slot)
{
log_info ("reader slot %d: active protocol:", slot);
if ((reader_table[slot].pcsc.protocol & PCSC_PROTOCOL_T0))
log_printf (" T0");
else if ((reader_table[slot].pcsc.protocol & PCSC_PROTOCOL_T1))
log_printf (" T1");
else if ((reader_table[slot].pcsc.protocol & PCSC_PROTOCOL_RAW))
log_printf (" raw");
log_printf ("\n");
}
/* Send an PC/SC reset command and return a status word on error or 0
on success. */
2003-08-05 17:11:04 +00:00
static int
reset_pcsc_reader (int slot)
{
#ifdef NEED_PCSC_WRAPPER
long err;
reader_table_t slotp;
size_t len;
int i, n;
unsigned char msgbuf[9];
unsigned int dummy_status;
int sw = SW_HOST_CARD_IO_ERROR;
slotp = reader_table + slot;
if (slotp->pcsc.req_fd == -1
|| slotp->pcsc.rsp_fd == -1
|| slotp->pcsc.pid == (pid_t)(-1) )
{
log_error ("pcsc_get_status: pcsc-wrapper not running\n");
return sw;
}
msgbuf[0] = 0x05; /* RESET command. */
len = 0;
msgbuf[1] = (len >> 24);
msgbuf[2] = (len >> 16);
msgbuf[3] = (len >> 8);
msgbuf[4] = (len );
if ( writen (slotp->pcsc.req_fd, msgbuf, 5) )
{
log_error ("error sending PC/SC RESET request: %s\n",
strerror (errno));
goto command_failed;
}
/* Read the response. */
if ((i=readn (slotp->pcsc.rsp_fd, msgbuf, 9, &len)) || len != 9)
{
log_error ("error receiving PC/SC RESET response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
len = (msgbuf[1] << 24) | (msgbuf[2] << 16) | (msgbuf[3] << 8 ) | msgbuf[4];
if (msgbuf[0] != 0x81 || len < 4)
{
log_error ("invalid response header from PC/SC received\n");
goto command_failed;
}
len -= 4; /* Already read the error code. */
if (len > DIM (slotp->atr))
{
log_error ("PC/SC returned a too large ATR (len=%lx)\n",
(unsigned long)len);
sw = SW_HOST_GENERAL_ERROR;
goto command_failed;
}
err = PCSC_ERR_MASK ((msgbuf[5] << 24) | (msgbuf[6] << 16)
| (msgbuf[7] << 8 ) | msgbuf[8]);
if (err)
{
log_error ("PC/SC RESET failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
/* If the error code is no smart card, we should not considere
this a major error and close the wrapper. */
sw = pcsc_error_to_sw (err);
if (err == PCSC_E_NO_SMARTCARD)
return sw;
goto command_failed;
}
/* The open function may return a zero for the ATR length to
indicate that no card is present. */
n = len;
if (n)
{
if ((i=readn (slotp->pcsc.rsp_fd, slotp->atr, n, &len)) || len != n)
{
log_error ("error receiving PC/SC RESET response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
}
slotp->atrlen = len;
/* Read the status so that IS_T0 will be set. */
pcsc_get_status (slot, &dummy_status);
return 0;
command_failed:
close (slotp->pcsc.req_fd);
close (slotp->pcsc.rsp_fd);
slotp->pcsc.req_fd = -1;
slotp->pcsc.rsp_fd = -1;
kill (slotp->pcsc.pid, SIGTERM);
slotp->pcsc.pid = (pid_t)(-1);
slotp->used = 0;
return sw;
#else /* !NEED_PCSC_WRAPPER */
long err;
char reader[250];
unsigned long nreader, atrlen;
unsigned long card_state, card_protocol;
if (reader_table[slot].pcsc.card)
{
err = pcsc_disconnect (reader_table[slot].pcsc.card, PCSC_LEAVE_CARD);
if (err)
{
log_error ("pcsc_disconnect failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
return SW_HOST_CARD_IO_ERROR;
}
reader_table[slot].pcsc.card = 0;
}
err = pcsc_connect (reader_table[slot].pcsc.context,
reader_table[slot].rdrname,
PCSC_SHARE_EXCLUSIVE,
PCSC_PROTOCOL_T0|PCSC_PROTOCOL_T1,
&reader_table[slot].pcsc.card,
&reader_table[slot].pcsc.protocol);
if (err)
{
log_error ("pcsc_connect failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
reader_table[slot].pcsc.card = 0;
return pcsc_error_to_sw (err);
}
atrlen = 33;
nreader = sizeof reader - 1;
err = pcsc_status (reader_table[slot].pcsc.card,
reader, &nreader,
&card_state, &card_protocol,
reader_table[slot].atr, &atrlen);
if (err)
{
log_error ("pcsc_status failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
reader_table[slot].atrlen = 0;
return pcsc_error_to_sw (err);
}
if (atrlen >= DIM (reader_table[0].atr))
log_bug ("ATR returned by pcsc_status is too large\n");
reader_table[slot].atrlen = atrlen;
reader_table[slot].is_t0 = !!(card_protocol & PCSC_PROTOCOL_T0);
return 0;
#endif /* !NEED_PCSC_WRAPPER */
}
static int
pcsc_get_status (int slot, unsigned int *status)
{
#ifdef NEED_PCSC_WRAPPER
long err;
reader_table_t slotp;
size_t len, full_len;
int i, n;
unsigned char msgbuf[9];
unsigned char buffer[16];
int sw = SW_HOST_CARD_IO_ERROR;
slotp = reader_table + slot;
if (slotp->pcsc.req_fd == -1
|| slotp->pcsc.rsp_fd == -1
|| slotp->pcsc.pid == (pid_t)(-1) )
{
log_error ("pcsc_get_status: pcsc-wrapper not running\n");
return sw;
}
msgbuf[0] = 0x04; /* STATUS command. */
len = 0;
msgbuf[1] = (len >> 24);
msgbuf[2] = (len >> 16);
msgbuf[3] = (len >> 8);
msgbuf[4] = (len );
if ( writen (slotp->pcsc.req_fd, msgbuf, 5) )
{
log_error ("error sending PC/SC STATUS request: %s\n",
strerror (errno));
goto command_failed;
}
/* Read the response. */
if ((i=readn (slotp->pcsc.rsp_fd, msgbuf, 9, &len)) || len != 9)
{
log_error ("error receiving PC/SC STATUS response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
len = (msgbuf[1] << 24) | (msgbuf[2] << 16) | (msgbuf[3] << 8 ) | msgbuf[4];
if (msgbuf[0] != 0x81 || len < 4)
{
log_error ("invalid response header from PC/SC received\n");
goto command_failed;
}
len -= 4; /* Already read the error code. */
err = PCSC_ERR_MASK ((msgbuf[5] << 24) | (msgbuf[6] << 16)
| (msgbuf[7] << 8 ) | msgbuf[8]);
if (err)
{
log_error ("pcsc_status failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
/* This is a proper error code, so return immediately. */
return pcsc_error_to_sw (err);
}
full_len = len;
/* The current version returns 3 words but we allow also for old
versions returning only 2 words. */
n = 12 < len ? 12 : len;
if ((i=readn (slotp->pcsc.rsp_fd, buffer, n, &len))
|| (len != 8 && len != 12))
{
log_error ("error receiving PC/SC STATUS response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
slotp->is_t0 = (len == 12 && !!(buffer[11] & PCSC_PROTOCOL_T0));
full_len -= len;
/* Newer versions of the wrapper might send more status bytes.
Read them. */
while (full_len)
{
unsigned char dummybuf[128];
n = full_len < DIM (dummybuf) ? full_len : DIM (dummybuf);
if ((i=readn (slotp->pcsc.rsp_fd, dummybuf, n, &len)) || len != n)
{
log_error ("error receiving PC/SC TRANSMIT response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
full_len -= n;
}
/* We are lucky: The wrapper already returns the data in the
required format. */
*status = buffer[3];
return 0;
command_failed:
close (slotp->pcsc.req_fd);
close (slotp->pcsc.rsp_fd);
slotp->pcsc.req_fd = -1;
slotp->pcsc.rsp_fd = -1;
kill (slotp->pcsc.pid, SIGTERM);
slotp->pcsc.pid = (pid_t)(-1);
slotp->used = 0;
return sw;
#else /*!NEED_PCSC_WRAPPER*/
long err;
struct pcsc_readerstate_s rdrstates[1];
memset (rdrstates, 0, sizeof *rdrstates);
rdrstates[0].reader = reader_table[slot].rdrname;
rdrstates[0].current_state = PCSC_STATE_UNAWARE;
err = pcsc_get_status_change (reader_table[slot].pcsc.context,
0,
rdrstates, 1);
if (err == PCSC_E_TIMEOUT)
err = 0; /* Timeout is no error error here. */
if (err)
{
log_error ("pcsc_get_status_change failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
return pcsc_error_to_sw (err);
}
/* log_debug */
/* ("pcsc_get_status_change: %s%s%s%s%s%s%s%s%s%s\n", */
/* (rdrstates[0].event_state & PCSC_STATE_IGNORE)? " ignore":"", */
/* (rdrstates[0].event_state & PCSC_STATE_CHANGED)? " changed":"", */
/* (rdrstates[0].event_state & PCSC_STATE_UNKNOWN)? " unknown":"", */
/* (rdrstates[0].event_state & PCSC_STATE_UNAVAILABLE)?" unavail":"", */
/* (rdrstates[0].event_state & PCSC_STATE_EMPTY)? " empty":"", */
/* (rdrstates[0].event_state & PCSC_STATE_PRESENT)? " present":"", */
/* (rdrstates[0].event_state & PCSC_STATE_ATRMATCH)? " atr":"", */
/* (rdrstates[0].event_state & PCSC_STATE_EXCLUSIVE)? " excl":"", */
/* (rdrstates[0].event_state & PCSC_STATE_INUSE)? " unuse":"", */
/* (rdrstates[0].event_state & PCSC_STATE_MUTE)? " mute":"" ); */
*status = 0;
if ( (rdrstates[0].event_state & PCSC_STATE_PRESENT) )
*status |= 2;
if ( !(rdrstates[0].event_state & PCSC_STATE_MUTE) )
*status |= 4;
/* We indicate a useful card if it is not in use by another
application. This is because we only use exclusive access
mode. */
if ( (*status & 6) == 6
&& !(rdrstates[0].event_state & PCSC_STATE_INUSE) )
*status |= 1;
return 0;
#endif /*!NEED_PCSC_WRAPPER*/
}
/* Actually send the APDU of length APDULEN to SLOT and return a
maximum of *BUFLEN data in BUFFER, the actual returned size will be
set to BUFLEN. Returns: CT API error code. */
static int
pcsc_send_apdu (int slot, unsigned char *apdu, size_t apdulen,
2005-11-28 11:52:25 +00:00
unsigned char *buffer, size_t *buflen,
struct pininfo_s *pininfo)
2003-08-05 17:11:04 +00:00
{
#ifdef NEED_PCSC_WRAPPER
long err;
reader_table_t slotp;
size_t len, full_len;
int i, n;
unsigned char msgbuf[9];
int sw = SW_HOST_CARD_IO_ERROR;
if (!reader_table[slot].atrlen
&& (err = reset_pcsc_reader (slot)))
return err;
if (DBG_CARD_IO)
log_printhex (" PCSC_data:", apdu, apdulen);
slotp = reader_table + slot;
if (slotp->pcsc.req_fd == -1
|| slotp->pcsc.rsp_fd == -1
|| slotp->pcsc.pid == (pid_t)(-1) )
{
log_error ("pcsc_send_apdu: pcsc-wrapper not running\n");
return sw;
}
msgbuf[0] = 0x03; /* TRANSMIT command. */
len = apdulen;
msgbuf[1] = (len >> 24);
msgbuf[2] = (len >> 16);
msgbuf[3] = (len >> 8);
msgbuf[4] = (len );
if ( writen (slotp->pcsc.req_fd, msgbuf, 5)
|| writen (slotp->pcsc.req_fd, apdu, len))
{
log_error ("error sending PC/SC TRANSMIT request: %s\n",
strerror (errno));
goto command_failed;
}
/* Read the response. */
if ((i=readn (slotp->pcsc.rsp_fd, msgbuf, 9, &len)) || len != 9)
{
log_error ("error receiving PC/SC TRANSMIT response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
len = (msgbuf[1] << 24) | (msgbuf[2] << 16) | (msgbuf[3] << 8 ) | msgbuf[4];
if (msgbuf[0] != 0x81 || len < 4)
{
log_error ("invalid response header from PC/SC received\n");
goto command_failed;
}
len -= 4; /* Already read the error code. */
err = PCSC_ERR_MASK ((msgbuf[5] << 24) | (msgbuf[6] << 16)
| (msgbuf[7] << 8 ) | msgbuf[8]);
if (err)
{
log_error ("pcsc_transmit failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
return pcsc_error_to_sw (err);
}
full_len = len;
n = *buflen < len ? *buflen : len;
if ((i=readn (slotp->pcsc.rsp_fd, buffer, n, &len)) || len != n)
{
log_error ("error receiving PC/SC TRANSMIT response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
*buflen = n;
full_len -= len;
if (full_len)
{
log_error ("pcsc_send_apdu: provided buffer too short - truncated\n");
err = SW_HOST_INV_VALUE;
}
/* We need to read any rest of the response, to keep the
protocol runnng. */
while (full_len)
{
unsigned char dummybuf[128];
n = full_len < DIM (dummybuf) ? full_len : DIM (dummybuf);
if ((i=readn (slotp->pcsc.rsp_fd, dummybuf, n, &len)) || len != n)
{
log_error ("error receiving PC/SC TRANSMIT response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
full_len -= n;
}
return err;
command_failed:
close (slotp->pcsc.req_fd);
close (slotp->pcsc.rsp_fd);
slotp->pcsc.req_fd = -1;
slotp->pcsc.rsp_fd = -1;
kill (slotp->pcsc.pid, SIGTERM);
slotp->pcsc.pid = (pid_t)(-1);
slotp->used = 0;
return sw;
#else /*!NEED_PCSC_WRAPPER*/
long err;
struct pcsc_io_request_s send_pci;
unsigned long recv_len;
if (!reader_table[slot].atrlen
&& (err = reset_pcsc_reader (slot)))
return err;
if (DBG_CARD_IO)
log_printhex (" PCSC_data:", apdu, apdulen);
if ((reader_table[slot].pcsc.protocol & PCSC_PROTOCOL_T1))
send_pci.protocol = PCSC_PROTOCOL_T1;
else
send_pci.protocol = PCSC_PROTOCOL_T0;
send_pci.pci_len = sizeof send_pci;
recv_len = *buflen;
err = pcsc_transmit (reader_table[slot].pcsc.card,
&send_pci, apdu, apdulen,
NULL, buffer, &recv_len);
*buflen = recv_len;
if (err)
log_error ("pcsc_transmit failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
return pcsc_error_to_sw (err);
#endif /*!NEED_PCSC_WRAPPER*/
}
static int
close_pcsc_reader (int slot)
{
#ifdef NEED_PCSC_WRAPPER
long err;
reader_table_t slotp;
size_t len;
int i;
unsigned char msgbuf[9];
slotp = reader_table + slot;
if (slotp->pcsc.req_fd == -1
|| slotp->pcsc.rsp_fd == -1
|| slotp->pcsc.pid == (pid_t)(-1) )
{
log_error ("close_pcsc_reader: pcsc-wrapper not running\n");
return 0;
}
msgbuf[0] = 0x02; /* CLOSE command. */
len = 0;
msgbuf[1] = (len >> 24);
msgbuf[2] = (len >> 16);
msgbuf[3] = (len >> 8);
msgbuf[4] = (len );
if ( writen (slotp->pcsc.req_fd, msgbuf, 5) )
{
log_error ("error sending PC/SC CLOSE request: %s\n",
strerror (errno));
goto command_failed;
}
/* Read the response. */
if ((i=readn (slotp->pcsc.rsp_fd, msgbuf, 9, &len)) || len != 9)
{
log_error ("error receiving PC/SC CLOSE response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
len = (msgbuf[1] << 24) | (msgbuf[2] << 16) | (msgbuf[3] << 8 ) | msgbuf[4];
if (msgbuf[0] != 0x81 || len < 4)
{
log_error ("invalid response header from PC/SC received\n");
goto command_failed;
}
len -= 4; /* Already read the error code. */
err = PCSC_ERR_MASK ((msgbuf[5] << 24) | (msgbuf[6] << 16)
| (msgbuf[7] << 8 ) | msgbuf[8]);
if (err)
log_error ("pcsc_close failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
/* We will close the wrapper in any case - errors are merely
informational. */
command_failed:
close (slotp->pcsc.req_fd);
close (slotp->pcsc.rsp_fd);
slotp->pcsc.req_fd = -1;
slotp->pcsc.rsp_fd = -1;
kill (slotp->pcsc.pid, SIGTERM);
slotp->pcsc.pid = (pid_t)(-1);
slotp->used = 0;
return 0;
#else /*!NEED_PCSC_WRAPPER*/
pcsc_release_context (reader_table[slot].pcsc.context);
xfree (reader_table[slot].rdrname);
reader_table[slot].rdrname = NULL;
reader_table[slot].used = 0;
return 0;
#endif /*!NEED_PCSC_WRAPPER*/
}
/* Note: It is a pitty that we can't return proper error codes. */
static int
open_pcsc_reader (const char *portstr)
{
#ifdef NEED_PCSC_WRAPPER
/* Open the PC/SC reader using the pcsc_wrapper program. This is
needed to cope with different thread models and other peculiarities
of libpcsclite. */
int slot;
reader_table_t slotp;
int fd, rp[2], wp[2];
int n, i;
pid_t pid;
size_t len;
unsigned char msgbuf[9];
int err;
unsigned int dummy_status;
int sw = SW_HOST_CARD_IO_ERROR;
const char *wrapperpgm = GNUPG_LIBEXECDIR "/gnupg-pcsc-wrapper";
2005-12-06 16:44:20 +00:00
if (access (wrapperpgm, X_OK))
{
log_error ("can't run PC/SC access module `%s': %s\n",
wrapperpgm, strerror (errno));
return -1;
}
slot = new_reader_slot ();
if (slot == -1)
return -1;
slotp = reader_table + slot;
/* Fire up the pcsc wrapper. We don't use any fork/exec code from
the common directy but implement it direclty so that this file
may still be source copied. */
if (pipe (rp) == -1)
{
log_error ("error creating a pipe: %s\n", strerror (errno));
slotp->used = 0;
return -1;
}
if (pipe (wp) == -1)
{
log_error ("error creating a pipe: %s\n", strerror (errno));
close (rp[0]);
close (rp[1]);
slotp->used = 0;
return -1;
}
pid = fork ();
if (pid == -1)
{
log_error ("error forking process: %s\n", strerror (errno));
close (rp[0]);
close (rp[1]);
close (wp[0]);
close (wp[1]);
slotp->used = 0;
return -1;
}
slotp->pcsc.pid = pid;
if (!pid)
{ /*
=== Child ===
*/
/* Double fork. */
pid = fork ();
if (pid == -1)
_exit (31);
if (pid)
_exit (0); /* Immediate exit this parent, so that the child
gets cleaned up by the init process. */
/* Connect our pipes. */
if (wp[0] != 0 && dup2 (wp[0], 0) == -1)
log_fatal ("dup2 stdin failed: %s\n", strerror (errno));
if (rp[1] != 1 && dup2 (rp[1], 1) == -1)
log_fatal ("dup2 stdout failed: %s\n", strerror (errno));
/* Send stderr to the bit bucket. */
fd = open ("/dev/null", O_WRONLY);
if (fd == -1)
log_fatal ("can't open `/dev/null': %s", strerror (errno));
if (fd != 2 && dup2 (fd, 2) == -1)
log_fatal ("dup2 stderr failed: %s\n", strerror (errno));
/* Close all other files. */
n = sysconf (_SC_OPEN_MAX);
if (n < 0)
n = MAX_OPEN_FDS;
for (i=3; i < n; i++)
close(i);
errno = 0;
2005-12-06 16:44:20 +00:00
execl (wrapperpgm,
"pcsc-wrapper",
"--",
"1", /* API version */
opt.pcsc_driver, /* Name of the PC/SC library. */
NULL);
_exit (31);
}
/*
=== Parent ===
*/
close (wp[0]);
close (rp[1]);
slotp->pcsc.req_fd = wp[1];
slotp->pcsc.rsp_fd = rp[0];
/* Wait for the intermediate child to terminate. */
#ifdef USE_GNU_PTH
#define WAIT pth_waitpid
#else
#define WAIT waitpid
#endif
while ( (i=WAIT (pid, NULL, 0)) == -1 && errno == EINTR)
;
#undef X
/* Now send the open request. */
msgbuf[0] = 0x01; /* OPEN command. */
len = portstr? strlen (portstr):0;
msgbuf[1] = (len >> 24);
msgbuf[2] = (len >> 16);
msgbuf[3] = (len >> 8);
msgbuf[4] = (len );
if ( writen (slotp->pcsc.req_fd, msgbuf, 5)
|| (portstr && writen (slotp->pcsc.req_fd, portstr, len)))
{
log_error ("error sending PC/SC OPEN request: %s\n",
strerror (errno));
goto command_failed;
}
/* Read the response. */
if ((i=readn (slotp->pcsc.rsp_fd, msgbuf, 9, &len)) || len != 9)
{
log_error ("error receiving PC/SC OPEN response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
len = (msgbuf[1] << 24) | (msgbuf[2] << 16) | (msgbuf[3] << 8 ) | msgbuf[4];
if (msgbuf[0] != 0x81 || len < 4)
{
log_error ("invalid response header from PC/SC received\n");
goto command_failed;
}
len -= 4; /* Already read the error code. */
if (len > DIM (slotp->atr))
{
log_error ("PC/SC returned a too large ATR (len=%lx)\n",
(unsigned long)len);
goto command_failed;
}
err = PCSC_ERR_MASK ((msgbuf[5] << 24) | (msgbuf[6] << 16)
| (msgbuf[7] << 8 ) | msgbuf[8]);
if (err)
{
log_error ("PC/SC OPEN failed: %s\n", pcsc_error_string (err));
sw = pcsc_error_to_sw (err);
goto command_failed;
}
slotp->last_status = 0;
/* The open request may return a zero for the ATR length to
indicate that no card is present. */
n = len;
if (n)
{
if ((i=readn (slotp->pcsc.rsp_fd, slotp->atr, n, &len)) || len != n)
{
log_error ("error receiving PC/SC OPEN response: %s\n",
i? strerror (errno) : "premature EOF");
goto command_failed;
}
/* If we got to here we know that a card is present
and usable. Thus remember this. */
slotp->last_status = (1|2|4| 0x8000);
}
slotp->atrlen = len;
reader_table[slot].close_reader = close_pcsc_reader;
reader_table[slot].reset_reader = reset_pcsc_reader;
reader_table[slot].get_status_reader = pcsc_get_status;
reader_table[slot].send_apdu_reader = pcsc_send_apdu;
2005-11-28 11:52:25 +00:00
reader_table[slot].check_keypad = NULL;
reader_table[slot].dump_status_reader = dump_pcsc_reader_status;
/* Read the status so that IS_T0 will be set. */
pcsc_get_status (slot, &dummy_status);
dump_reader_status (slot);
return slot;
command_failed:
close (slotp->pcsc.req_fd);
close (slotp->pcsc.rsp_fd);
slotp->pcsc.req_fd = -1;
slotp->pcsc.rsp_fd = -1;
kill (slotp->pcsc.pid, SIGTERM);
slotp->pcsc.pid = (pid_t)(-1);
slotp->used = 0;
/* There is no way to return SW. */
return -1;
#else /*!NEED_PCSC_WRAPPER */
2003-08-05 17:11:04 +00:00
long err;
int slot;
char *list = NULL;
unsigned long nreader, listlen, atrlen;
char *p;
unsigned long card_state, card_protocol;
slot = new_reader_slot ();
if (slot == -1)
return -1;
err = pcsc_establish_context (PCSC_SCOPE_SYSTEM, NULL, NULL,
&reader_table[slot].pcsc.context);
if (err)
{
log_error ("pcsc_establish_context failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
reader_table[slot].used = 0;
return -1;
}
2003-08-05 17:11:04 +00:00
err = pcsc_list_readers (reader_table[slot].pcsc.context,
NULL, NULL, &nreader);
if (!err)
{
list = xtrymalloc (nreader+1); /* Better add 1 for safety reasons. */
if (!list)
{
log_error ("error allocating memory for reader list\n");
pcsc_release_context (reader_table[slot].pcsc.context);
reader_table[slot].used = 0;
return -1 /*SW_HOST_OUT_OF_CORE*/;
2003-08-05 17:11:04 +00:00
}
err = pcsc_list_readers (reader_table[slot].pcsc.context,
NULL, list, &nreader);
}
if (err)
{
log_error ("pcsc_list_readers failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
pcsc_release_context (reader_table[slot].pcsc.context);
reader_table[slot].used = 0;
xfree (list);
return -1 /*pcsc_error_to_sw (err)*/;
2003-08-05 17:11:04 +00:00
}
listlen = nreader;
p = list;
while (nreader)
{
if (!*p && !p[1])
break;
if (*p)
log_info ("detected reader `%s'\n", p);
2003-08-05 17:11:04 +00:00
if (nreader < (strlen (p)+1))
{
log_error ("invalid response from pcsc_list_readers\n");
break;
}
nreader -= strlen (p)+1;
p += strlen (p) + 1;
}
reader_table[slot].rdrname = xtrymalloc (strlen (portstr? portstr : list)+1);
if (!reader_table[slot].rdrname)
{
log_error ("error allocating memory for reader name\n");
pcsc_release_context (reader_table[slot].pcsc.context);
reader_table[slot].used = 0;
return -1 /*SW_HOST_OUT_OF_CORE*/;
}
strcpy (reader_table[slot].rdrname, portstr? portstr : list);
xfree (list);
2006-03-01 11:05:47 +00:00
list = NULL;
2003-08-05 17:11:04 +00:00
err = pcsc_connect (reader_table[slot].pcsc.context,
reader_table[slot].rdrname,
2003-08-05 17:11:04 +00:00
PCSC_SHARE_EXCLUSIVE,
PCSC_PROTOCOL_T0|PCSC_PROTOCOL_T1,
&reader_table[slot].pcsc.card,
&reader_table[slot].pcsc.protocol);
if (err == PCSC_E_NO_SMARTCARD)
reader_table[slot].pcsc.card = 0;
else if (err)
2003-08-05 17:11:04 +00:00
{
log_error ("pcsc_connect failed: %s (0x%lx)\n",
pcsc_error_string (err), err);
pcsc_release_context (reader_table[slot].pcsc.context);
xfree (reader_table[slot].rdrname);
reader_table[slot].rdrname = NULL;
2003-08-05 17:11:04 +00:00
reader_table[slot].used = 0;
return -1 /*pcsc_error_to_sw (err)*/;
}
reader_table[slot].atrlen = 0;
reader_table[slot].last_status = 0;
if (!err)
{
char reader[250];
unsigned long readerlen;
atrlen = 32;
readerlen = sizeof reader -1 ;
err = pcsc_status (reader_table[slot].pcsc.card,
reader, &readerlen,
&card_state, &card_protocol,
reader_table[slot].atr, &atrlen);
if (err)
log_error ("pcsc_status failed: %s (0x%lx) %lu\n",
pcsc_error_string (err), err, readerlen);
else
{
if (atrlen >= DIM (reader_table[0].atr))
log_bug ("ATR returned by pcsc_status is too large\n");
reader_table[slot].atrlen = atrlen;
/* If we got to here we know that a card is present
and usable. Thus remember this. */
reader_table[slot].last_status = (1|2|4| 0x8000);
reader_table[slot].is_t0 = !!(card_protocol & PCSC_PROTOCOL_T0);
}
}
reader_table[slot].close_reader = close_pcsc_reader;
reader_table[slot].reset_reader = reset_pcsc_reader;
reader_table[slot].get_status_reader = pcsc_get_status;
reader_table[slot].send_apdu_reader = pcsc_send_apdu;
2005-11-28 11:52:25 +00:00
reader_table[slot].check_keypad = NULL;
reader_table[slot].dump_status_reader = dump_pcsc_reader_status;
/* log_debug ("state from pcsc_status: 0x%lx\n", card_state); */
/* log_debug ("protocol from pcsc_status: 0x%lx\n", card_protocol); */
dump_reader_status (slot);
return slot;
#endif /*!NEED_PCSC_WRAPPER */
}
#ifdef HAVE_LIBUSB
/*
Internal CCID driver interface.
*/
static void
dump_ccid_reader_status (int slot)
{
log_info ("reader slot %d: using ccid driver\n", slot);
}
static int
close_ccid_reader (int slot)
{
ccid_close_reader (reader_table[slot].ccid.handle);
reader_table[slot].used = 0;
return 0;
}
static int
shutdown_ccid_reader (int slot)
{
ccid_shutdown_reader (reader_table[slot].ccid.handle);
return 0;
}
static int
reset_ccid_reader (int slot)
{
int err;
reader_table_t slotp = reader_table + slot;
unsigned char atr[33];
size_t atrlen;
err = ccid_get_atr (slotp->ccid.handle, atr, sizeof atr, &atrlen);
if (err)
return err;
/* If the reset was successful, update the ATR. */
assert (sizeof slotp->atr >= sizeof atr);
slotp->atrlen = atrlen;
memcpy (slotp->atr, atr, atrlen);
dump_reader_status (slot);
return 0;
}
static int
get_status_ccid (int slot, unsigned int *status)
{
int rc;
int bits;
rc = ccid_slot_status (reader_table[slot].ccid.handle, &bits);
if (rc)
return -1;
if (bits == 0)
*status = 1|2|4;
else if (bits == 1)
*status = 2;
else
*status = 0;
return 0;
}
/* Actually send the APDU of length APDULEN to SLOT and return a
maximum of *BUFLEN data in BUFFER, the actual returned size will be
set to BUFLEN. Returns: Internal CCID driver error code. */
static int
send_apdu_ccid (int slot, unsigned char *apdu, size_t apdulen,
2005-11-28 11:52:25 +00:00
unsigned char *buffer, size_t *buflen,
struct pininfo_s *pininfo)
{
long err;
size_t maxbuflen;
/* If we don't have an ATR, we need to reset the reader first. */
if (!reader_table[slot].atrlen
&& (err = reset_ccid_reader (slot)))
return err;
if (DBG_CARD_IO)
log_printhex (" APDU_data:", apdu, apdulen);
maxbuflen = *buflen;
2005-11-28 11:52:25 +00:00
if (pininfo)
err = ccid_transceive_secure (reader_table[slot].ccid.handle,
apdu, apdulen,
pininfo->mode,
pininfo->minlen,
pininfo->maxlen,
pininfo->padlen,
buffer, maxbuflen, buflen);
else
err = ccid_transceive (reader_table[slot].ccid.handle,
apdu, apdulen,
buffer, maxbuflen, buflen);
if (err)
log_error ("ccid_transceive failed: (0x%lx)\n",
err);
return err;
}
2005-11-28 11:52:25 +00:00
/* Check whether the CCID reader supports the ISO command code COMMAND
on the keypad. Return 0 on success. For a description of the pin
parameters, see ccid-driver.c */
static int
check_ccid_keypad (int slot, int command, int pin_mode,
int pinlen_min, int pinlen_max, int pin_padlen)
{
unsigned char apdu[] = { 0, 0, 0, 0x81 };
apdu[1] = command;
return ccid_transceive_secure (reader_table[slot].ccid.handle,
apdu, sizeof apdu,
pin_mode, pinlen_min, pinlen_max, pin_padlen,
NULL, 0, NULL);
}
/* Open the reader and try to read an ATR. */
static int
open_ccid_reader (const char *portstr)
{
int err;
int slot;
reader_table_t slotp;
slot = new_reader_slot ();
if (slot == -1)
return -1;
slotp = reader_table + slot;
err = ccid_open_reader (&slotp->ccid.handle, portstr);
if (err)
{
slotp->used = 0;
return -1;
}
err = ccid_get_atr (slotp->ccid.handle,
slotp->atr, sizeof slotp->atr, &slotp->atrlen);
if (err)
{
slotp->atrlen = 0;
err = 0;
}
else
{
/* If we got to here we know that a card is present
and usable. Thus remember this. */
reader_table[slot].last_status = (1|2|4| 0x8000);
}
reader_table[slot].close_reader = close_ccid_reader;
reader_table[slot].shutdown_reader = shutdown_ccid_reader;
reader_table[slot].reset_reader = reset_ccid_reader;
reader_table[slot].get_status_reader = get_status_ccid;
reader_table[slot].send_apdu_reader = send_apdu_ccid;
2005-11-28 11:52:25 +00:00
reader_table[slot].check_keypad = check_ccid_keypad;
reader_table[slot].dump_status_reader = dump_ccid_reader_status;
dump_reader_status (slot);
return slot;
}
#endif /* HAVE_LIBUSB */
#ifdef USE_G10CODE_RAPDU
/*
The Remote APDU Interface.
This uses the Remote APDU protocol to contact a reader.
The port number is actually an index into the list of ports as
returned via the protocol.
*/
static int
rapdu_status_to_sw (int status)
{
int rc;
switch (status)
{
case RAPDU_STATUS_SUCCESS: rc = 0; break;
case RAPDU_STATUS_INVCMD:
case RAPDU_STATUS_INVPROT:
case RAPDU_STATUS_INVSEQ:
case RAPDU_STATUS_INVCOOKIE:
case RAPDU_STATUS_INVREADER: rc = SW_HOST_INV_VALUE; break;
case RAPDU_STATUS_TIMEOUT: rc = SW_HOST_CARD_IO_ERROR; break;
case RAPDU_STATUS_CARDIO: rc = SW_HOST_CARD_IO_ERROR; break;
case RAPDU_STATUS_NOCARD: rc = SW_HOST_NO_CARD; break;
case RAPDU_STATUS_CARDCHG: rc = SW_HOST_NO_CARD; break;
case RAPDU_STATUS_BUSY: rc = SW_HOST_BUSY; break;
case RAPDU_STATUS_NEEDRESET: rc = SW_HOST_CARD_INACTIVE; break;
default: rc = SW_HOST_GENERAL_ERROR; break;
}
return rc;
}
2003-08-05 17:11:04 +00:00
static int
close_rapdu_reader (int slot)
{
rapdu_release (reader_table[slot].rapdu.handle);
reader_table[slot].used = 0;
return 0;
}
static int
reset_rapdu_reader (int slot)
{
int err;
reader_table_t slotp;
rapdu_msg_t msg = NULL;
slotp = reader_table + slot;
err = rapdu_send_cmd (slotp->rapdu.handle, RAPDU_CMD_RESET);
if (err)
{
log_error ("sending rapdu command RESET failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
rapdu_msg_release (msg);
return rapdu_status_to_sw (err);
}
err = rapdu_read_msg (slotp->rapdu.handle, &msg);
if (err)
{
log_error ("receiving rapdu message failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
rapdu_msg_release (msg);
return rapdu_status_to_sw (err);
}
if (msg->cmd != RAPDU_STATUS_SUCCESS || !msg->datalen)
{
int sw = rapdu_status_to_sw (msg->cmd);
log_error ("rapdu command RESET failed: %s\n",
rapdu_strerror (msg->cmd));
rapdu_msg_release (msg);
return sw;
}
if (msg->datalen >= DIM (slotp->atr))
{
log_error ("ATR returned by the RAPDU layer is too large\n");
rapdu_msg_release (msg);
return SW_HOST_INV_VALUE;
}
slotp->atrlen = msg->datalen;
memcpy (slotp->atr, msg->data, msg->datalen);
rapdu_msg_release (msg);
return 0;
}
static int
my_rapdu_get_status (int slot, unsigned int *status)
{
int err;
reader_table_t slotp;
rapdu_msg_t msg = NULL;
int oldslot;
slotp = reader_table + slot;
oldslot = rapdu_set_reader (slotp->rapdu.handle, slot);
err = rapdu_send_cmd (slotp->rapdu.handle, RAPDU_CMD_GET_STATUS);
rapdu_set_reader (slotp->rapdu.handle, oldslot);
if (err)
{
log_error ("sending rapdu command GET_STATUS failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
return rapdu_status_to_sw (err);
}
err = rapdu_read_msg (slotp->rapdu.handle, &msg);
if (err)
{
log_error ("receiving rapdu message failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
rapdu_msg_release (msg);
return rapdu_status_to_sw (err);
}
if (msg->cmd != RAPDU_STATUS_SUCCESS || !msg->datalen)
{
int sw = rapdu_status_to_sw (msg->cmd);
log_error ("rapdu command GET_STATUS failed: %s\n",
rapdu_strerror (msg->cmd));
rapdu_msg_release (msg);
return sw;
}
*status = msg->data[0];
rapdu_msg_release (msg);
return 0;
}
/* Actually send the APDU of length APDULEN to SLOT and return a
maximum of *BUFLEN data in BUFFER, the actual returned size will be
set to BUFLEN. Returns: APDU error code. */
static int
my_rapdu_send_apdu (int slot, unsigned char *apdu, size_t apdulen,
2005-11-28 11:52:25 +00:00
unsigned char *buffer, size_t *buflen,
struct pininfo_s *pininfo)
{
int err;
reader_table_t slotp;
rapdu_msg_t msg = NULL;
size_t maxlen = *buflen;
slotp = reader_table + slot;
*buflen = 0;
if (DBG_CARD_IO)
log_printhex (" APDU_data:", apdu, apdulen);
if (apdulen < 4)
{
log_error ("rapdu_send_apdu: APDU is too short\n");
return SW_HOST_INV_VALUE;
}
err = rapdu_send_apdu (slotp->rapdu.handle, apdu, apdulen);
if (err)
{
log_error ("sending rapdu command APDU failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
rapdu_msg_release (msg);
return rapdu_status_to_sw (err);
}
err = rapdu_read_msg (slotp->rapdu.handle, &msg);
if (err)
{
log_error ("receiving rapdu message failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
rapdu_msg_release (msg);
return rapdu_status_to_sw (err);
}
if (msg->cmd != RAPDU_STATUS_SUCCESS || !msg->datalen)
{
int sw = rapdu_status_to_sw (msg->cmd);
log_error ("rapdu command APDU failed: %s\n",
rapdu_strerror (msg->cmd));
rapdu_msg_release (msg);
return sw;
}
if (msg->datalen > maxlen)
{
log_error ("rapdu response apdu too large\n");
rapdu_msg_release (msg);
return SW_HOST_INV_VALUE;
}
*buflen = msg->datalen;
memcpy (buffer, msg->data, msg->datalen);
rapdu_msg_release (msg);
return 0;
}
static int
open_rapdu_reader (int portno,
const unsigned char *cookie, size_t length,
int (*readfnc) (void *opaque,
void *buffer, size_t size),
void *readfnc_value,
int (*writefnc) (void *opaque,
const void *buffer, size_t size),
void *writefnc_value,
void (*closefnc) (void *opaque),
void *closefnc_value)
{
int err;
int slot;
reader_table_t slotp;
rapdu_msg_t msg = NULL;
slot = new_reader_slot ();
if (slot == -1)
return -1;
slotp = reader_table + slot;
slotp->rapdu.handle = rapdu_new ();
if (!slotp->rapdu.handle)
{
slotp->used = 0;
return -1;
}
rapdu_set_reader (slotp->rapdu.handle, portno);
rapdu_set_iofunc (slotp->rapdu.handle,
readfnc, readfnc_value,
writefnc, writefnc_value,
closefnc, closefnc_value);
rapdu_set_cookie (slotp->rapdu.handle, cookie, length);
/* First try to get the current ATR, but if the card is inactive
issue a reset instead. */
err = rapdu_send_cmd (slotp->rapdu.handle, RAPDU_CMD_GET_ATR);
if (err == RAPDU_STATUS_NEEDRESET)
err = rapdu_send_cmd (slotp->rapdu.handle, RAPDU_CMD_RESET);
if (err)
{
log_info ("sending rapdu command GET_ATR/RESET failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
goto failure;
}
err = rapdu_read_msg (slotp->rapdu.handle, &msg);
if (err)
{
log_info ("receiving rapdu message failed: %s\n",
err < 0 ? strerror (errno): rapdu_strerror (err));
goto failure;
}
if (msg->cmd != RAPDU_STATUS_SUCCESS || !msg->datalen)
{
log_info ("rapdu command GET ATR failed: %s\n",
rapdu_strerror (msg->cmd));
goto failure;
}
if (msg->datalen >= DIM (slotp->atr))
{
log_error ("ATR returned by the RAPDU layer is too large\n");
goto failure;
}
slotp->atrlen = msg->datalen;
memcpy (slotp->atr, msg->data, msg->datalen);
reader_table[slot].close_reader = close_rapdu_reader;
reader_table[slot].reset_reader = reset_rapdu_reader;
reader_table[slot].get_status_reader = my_rapdu_get_status;
reader_table[slot].send_apdu_reader = my_rapdu_send_apdu;
2005-11-28 11:52:25 +00:00
reader_table[slot].check_keypad = NULL;
reader_table[slot].dump_status_reader = NULL;
dump_reader_status (slot);
rapdu_msg_release (msg);
return slot;
failure:
rapdu_msg_release (msg);
rapdu_release (slotp->rapdu.handle);
slotp->used = 0;
return -1;
}
#endif /*USE_G10CODE_RAPDU*/
/*
Driver Access
*/
static int
lock_slot (int slot)
{
#ifdef USE_GNU_PTH
if (!pth_mutex_acquire (&reader_table[slot].lock, 0, NULL))
{
log_error ("failed to acquire apdu lock: %s\n", strerror (errno));
return SW_HOST_LOCKING_FAILED;
}
#endif /*USE_GNU_PTH*/
return 0;
}
static int
trylock_slot (int slot)
{
#ifdef USE_GNU_PTH
if (!pth_mutex_acquire (&reader_table[slot].lock, TRUE, NULL))
{
if (errno == EBUSY)
return SW_HOST_BUSY;
log_error ("failed to acquire apdu lock: %s\n", strerror (errno));
return SW_HOST_LOCKING_FAILED;
}
#endif /*USE_GNU_PTH*/
return 0;
}
static void
unlock_slot (int slot)
{
#ifdef USE_GNU_PTH
if (!pth_mutex_release (&reader_table[slot].lock))
log_error ("failed to release apdu lock: %s\n", strerror (errno));
#endif /*USE_GNU_PTH*/
}
/* Open the reader and return an internal slot number or -1 on
2003-08-05 17:11:04 +00:00
error. If PORTSTR is NULL we default to a suitable port (for ctAPI:
the first USB reader. For PC/SC the first listed reader). */
int
2003-08-05 17:11:04 +00:00
apdu_open_reader (const char *portstr)
{
2003-08-05 17:11:04 +00:00
static int pcsc_api_loaded, ct_api_loaded;
#ifdef HAVE_LIBUSB
if (!opt.disable_ccid)
{
int slot, i;
const char *s;
slot = open_ccid_reader (portstr);
if (slot != -1)
return slot; /* got one */
/* If a CCID reader specification has been given, the user does
not want a fallback to other drivers. */
if (portstr)
for (s=portstr, i=0; *s; s++)
if (*s == ':' && (++i == 3))
return -1;
}
#endif /* HAVE_LIBUSB */
2003-08-05 17:11:04 +00:00
if (opt.ctapi_driver && *opt.ctapi_driver)
{
int port = portstr? atoi (portstr) : 32768;
if (!ct_api_loaded)
{
void *handle;
2003-08-05 17:11:04 +00:00
handle = dlopen (opt.ctapi_driver, RTLD_LAZY);
if (!handle)
{
log_error ("apdu_open_reader: failed to open driver: %s\n",
2003-08-05 17:11:04 +00:00
dlerror ());
return -1;
}
CT_init = dlsym (handle, "CT_init");
CT_data = dlsym (handle, "CT_data");
CT_close = dlsym (handle, "CT_close");
if (!CT_init || !CT_data || !CT_close)
{
log_error ("apdu_open_reader: invalid CT-API driver\n");
2003-08-05 17:11:04 +00:00
dlclose (handle);
return -1;
}
ct_api_loaded = 1;
}
return open_ct_reader (port);
}
2003-08-05 17:11:04 +00:00
/* No ctAPI configured, so lets try the PC/SC API */
if (!pcsc_api_loaded)
{
#ifndef NEED_PCSC_WRAPPER
void *handle;
handle = dlopen (opt.pcsc_driver, RTLD_LAZY);
if (!handle)
{
log_error ("apdu_open_reader: failed to open driver `%s': %s\n",
opt.pcsc_driver, dlerror ());
return -1;
}
2003-08-05 17:11:04 +00:00
pcsc_establish_context = dlsym (handle, "SCardEstablishContext");
pcsc_release_context = dlsym (handle, "SCardReleaseContext");
pcsc_list_readers = dlsym (handle, "SCardListReaders");
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
if (!pcsc_list_readers)
pcsc_list_readers = dlsym (handle, "SCardListReadersA");
#endif
pcsc_get_status_change = dlsym (handle, "SCardGetStatusChange");
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
if (!pcsc_get_status_change)
pcsc_get_status_change = dlsym (handle, "SCardGetStatusChangeA");
#endif
2003-08-05 17:11:04 +00:00
pcsc_connect = dlsym (handle, "SCardConnect");
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
if (!pcsc_connect)
pcsc_connect = dlsym (handle, "SCardConnectA");
#endif
pcsc_reconnect = dlsym (handle, "SCardReconnect");
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
if (!pcsc_reconnect)
pcsc_reconnect = dlsym (handle, "SCardReconnectA");
#endif
2003-08-05 17:11:04 +00:00
pcsc_disconnect = dlsym (handle, "SCardDisconnect");
pcsc_status = dlsym (handle, "SCardStatus");
2005-11-28 11:52:25 +00:00
#if defined(_WIN32) || defined(__CYGWIN__)
if (!pcsc_status)
pcsc_status = dlsym (handle, "SCardStatusA");
#endif
2003-08-05 17:11:04 +00:00
pcsc_begin_transaction = dlsym (handle, "SCardBeginTransaction");
pcsc_end_transaction = dlsym (handle, "SCardEndTransaction");
pcsc_transmit = dlsym (handle, "SCardTransmit");
pcsc_set_timeout = dlsym (handle, "SCardSetTimeout");
if (!pcsc_establish_context
|| !pcsc_release_context
|| !pcsc_list_readers
|| !pcsc_get_status_change
|| !pcsc_connect
|| !pcsc_reconnect
2003-08-05 17:11:04 +00:00
|| !pcsc_disconnect
|| !pcsc_status
|| !pcsc_begin_transaction
|| !pcsc_end_transaction
|| !pcsc_transmit
/* || !pcsc_set_timeout */)
{
/* Note that set_timeout is currently not used and also not
available under Windows. */
log_error ("apdu_open_reader: invalid PC/SC driver "
"(%d%d%d%d%d%d%d%d%d%d%d%d)\n",
!!pcsc_establish_context,
!!pcsc_release_context,
!!pcsc_list_readers,
!!pcsc_get_status_change,
!!pcsc_connect,
!!pcsc_reconnect,
!!pcsc_disconnect,
!!pcsc_status,
!!pcsc_begin_transaction,
!!pcsc_end_transaction,
!!pcsc_transmit,
!!pcsc_set_timeout );
dlclose (handle);
return -1;
}
#endif /*!NEED_PCSC_WRAPPER*/
2003-08-05 17:11:04 +00:00
pcsc_api_loaded = 1;
}
2003-08-05 17:11:04 +00:00
return open_pcsc_reader (portstr);
}
/* Open an remote reader and return an internal slot number or -1 on
error. This function is an alternative to apdu_open_reader and used
with remote readers only. Note that the supplied CLOSEFNC will
only be called once and the slot will not be valid afther this.
If PORTSTR is NULL we default to the first availabe port.
*/
int
apdu_open_remote_reader (const char *portstr,
const unsigned char *cookie, size_t length,
int (*readfnc) (void *opaque,
void *buffer, size_t size),
void *readfnc_value,
int (*writefnc) (void *opaque,
const void *buffer, size_t size),
void *writefnc_value,
void (*closefnc) (void *opaque),
void *closefnc_value)
{
#ifdef USE_G10CODE_RAPDU
return open_rapdu_reader (portstr? atoi (portstr) : 0,
cookie, length,
readfnc, readfnc_value,
writefnc, writefnc_value,
closefnc, closefnc_value);
#else
#ifdef _WIN32
errno = ENOENT;
#else
errno = ENOSYS;
#endif
return -1;
#endif
}
int
apdu_close_reader (int slot)
{
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if (reader_table[slot].close_reader)
return reader_table[slot].close_reader (slot);
return SW_HOST_NOT_SUPPORTED;
}
/* Shutdown a reader; that is basically the same as a close but keeps
2006-03-01 11:05:47 +00:00
the handle ready for later use. A apdu_reset_reader should be used
to get it active again. */
int
apdu_shutdown_reader (int slot)
{
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if (reader_table[slot].shutdown_reader)
return reader_table[slot].shutdown_reader (slot);
return SW_HOST_NOT_SUPPORTED;
}
/* Enumerate all readers and return information on whether this reader
is in use. The caller should start with SLOT set to 0 and
increment it with each call until an error is returned. */
int
apdu_enum_reader (int slot, int *used)
{
if (slot < 0 || slot >= MAX_READER)
return SW_HOST_NO_DRIVER;
*used = reader_table[slot].used;
return 0;
}
/* Do a reset for the card in reader at SLOT. */
int
apdu_reset (int slot)
{
int sw;
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if ((sw = lock_slot (slot)))
return sw;
reader_table[slot].last_status = 0;
if (reader_table[slot].reset_reader)
sw = reader_table[slot].reset_reader (slot);
if (!sw)
{
/* If we got to here we know that a card is present
and usable. Thus remember this. */
reader_table[slot].last_status = (1|2|4| 0x8000);
}
unlock_slot (slot);
return sw;
}
/* Activate a card if it has not yet been done. This is a kind of
reset-if-required. It is useful to test for presence of a card
before issuing a bunch of apdu commands. It does not wait on a
locked card. */
int
apdu_activate (int slot)
{
int sw;
unsigned int s;
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if ((sw = trylock_slot (slot)))
return sw;
if (reader_table[slot].get_status_reader)
sw = reader_table[slot].get_status_reader (slot, &s);
if (!sw)
{
if (!(s & 2)) /* Card not present. */
sw = SW_HOST_NO_CARD;
else if ( ((s & 2) && !(s & 4))
|| !reader_table[slot].atrlen )
{
/* We don't have an ATR or a card is present though inactive:
do a reset now. */
if (reader_table[slot].reset_reader)
{
reader_table[slot].last_status = 0;
sw = reader_table[slot].reset_reader (slot);
if (!sw)
{
/* If we got to here we know that a card is present
and usable. Thus remember this. */
reader_table[slot].last_status = (1|2|4| 0x8000);
}
}
}
}
unlock_slot (slot);
return sw;
}
unsigned char *
apdu_get_atr (int slot, size_t *atrlen)
{
unsigned char *buf;
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return NULL;
buf = xtrymalloc (reader_table[slot].atrlen);
if (!buf)
return NULL;
memcpy (buf, reader_table[slot].atr, reader_table[slot].atrlen);
*atrlen = reader_table[slot].atrlen;
return buf;
}
/* Retrieve the status for SLOT. The function does only wait for the
card to become available if HANG is set to true. On success the
bits in STATUS will be set to
bit 0 = card present and usable
bit 1 = card present
bit 2 = card active
bit 3 = card access locked [not yet implemented]
For must application, testing bit 0 is sufficient.
CHANGED will receive the value of the counter tracking the number
of card insertions. This value may be used to detect a card
change.
*/
int
apdu_get_status (int slot, int hang,
unsigned int *status, unsigned int *changed)
{
int sw;
unsigned int s;
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if ((sw = hang? lock_slot (slot) : trylock_slot (slot)))
return sw;
if (reader_table[slot].get_status_reader)
sw = reader_table[slot].get_status_reader (slot, &s);
unlock_slot (slot);
if (sw)
{
reader_table[slot].last_status = 0;
return sw;
}
/* Keep track of changes. We use one extra bit to test whether we
have checked the status at least once. */
if ( s != (reader_table[slot].last_status & 0x07ff)
|| !reader_table[slot].last_status )
{
reader_table[slot].change_counter++;
/* Make sure that the ATR is invalid so that a reset will be by
activate. */
reader_table[slot].atrlen = 0;
}
reader_table[slot].last_status = (s | 0x8000);
if (status)
*status = s;
if (changed)
*changed = reader_table[slot].change_counter;
return 0;
}
2005-11-28 11:52:25 +00:00
/* Check whether the reader supports the ISO command code COMMAND on
the keypad. Return 0 on success. For a description of the pin
parameters, see ccid-driver.c */
int
apdu_check_keypad (int slot, int command, int pin_mode,
int pinlen_min, int pinlen_max, int pin_padlen)
{
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if (reader_table[slot].check_keypad)
return reader_table[slot].check_keypad (slot, command,
pin_mode, pinlen_min, pinlen_max,
pin_padlen);
else
return SW_HOST_NOT_SUPPORTED;
}
/* Dispatcher for the actual send_apdu function. Note, that this
function should be called in locked state. */
static int
send_apdu (int slot, unsigned char *apdu, size_t apdulen,
2005-11-28 11:52:25 +00:00
unsigned char *buffer, size_t *buflen, struct pininfo_s *pininfo)
{
2003-08-05 17:11:04 +00:00
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if (reader_table[slot].send_apdu_reader)
return reader_table[slot].send_apdu_reader (slot,
apdu, apdulen,
2005-11-28 11:52:25 +00:00
buffer, buflen, pininfo);
2003-08-05 17:11:04 +00:00
else
return SW_HOST_NOT_SUPPORTED;
}
2005-11-28 11:52:25 +00:00
/* Core APDU trabceiver function. Parameters are described at
apdu_send_le with the exception of PININFO which indicates keypad
related operations if not NULL. */
static int
send_le (int slot, int class, int ins, int p0, int p1,
int lc, const char *data, int le,
unsigned char **retbuf, size_t *retbuflen,
struct pininfo_s *pininfo)
{
2006-11-28 16:36:02 +00:00
#define RESULTLEN 258
unsigned char result[RESULTLEN+10]; /* 10 extra in case of bugs in
the driver. */
size_t resultlen;
unsigned char apdu[5+256+1];
size_t apdulen;
2003-08-05 17:11:04 +00:00
int sw;
long rc; /* we need a long here due to PC/SC. */
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if (DBG_CARD_IO)
log_debug ("send apdu: c=%02X i=%02X p0=%02X p1=%02X lc=%d le=%d\n",
class, ins, p0, p1, lc, le);
if (lc != -1 && (lc > 255 || lc < 0))
return SW_WRONG_LENGTH;
if (le != -1 && (le > 256 || le < 0))
return SW_WRONG_LENGTH;
if ((!data && lc != -1) || (data && lc == -1))
return SW_HOST_INV_VALUE;
if ((sw = lock_slot (slot)))
return sw;
apdulen = 0;
apdu[apdulen++] = class;
apdu[apdulen++] = ins;
apdu[apdulen++] = p0;
apdu[apdulen++] = p1;
if (lc != -1)
{
apdu[apdulen++] = lc;
memcpy (apdu+apdulen, data, lc);
apdulen += lc;
/* T=0 does not allow the use of Lc together with Le; thus
disable Le in this case. */
if (reader_table[slot].is_t0)
le = -1;
}
if (le != -1)
apdu[apdulen++] = le; /* Truncation is okay because 0 means 256. */
assert (sizeof (apdu) >= apdulen);
/* As safeguard don't pass any garbage from the stack to the driver. */
memset (apdu+apdulen, 0, sizeof (apdu) - apdulen);
resultlen = RESULTLEN;
2005-11-28 11:52:25 +00:00
rc = send_apdu (slot, apdu, apdulen, result, &resultlen, pininfo);
if (rc || resultlen < 2)
{
log_error ("apdu_send_simple(%d) failed: %s\n",
slot, apdu_strerror (rc));
unlock_slot (slot);
return rc? rc : SW_HOST_INCOMPLETE_CARD_RESPONSE;
}
sw = (result[resultlen-2] << 8) | result[resultlen-1];
/* store away the returned data but strip the statusword. */
resultlen -= 2;
if (DBG_CARD_IO)
{
log_debug (" response: sw=%04X datalen=%d\n",
sw, (unsigned int)resultlen);
if ( !retbuf && (sw == SW_SUCCESS || (sw & 0xff00) == SW_MORE_DATA))
log_printhex (" dump: ", result, resultlen);
}
if (sw == SW_SUCCESS || sw == SW_EOF_REACHED)
{
if (retbuf)
{
*retbuf = xtrymalloc (resultlen? resultlen : 1);
if (!*retbuf)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
*retbuflen = resultlen;
memcpy (*retbuf, result, resultlen);
}
}
else if ((sw & 0xff00) == SW_MORE_DATA)
{
unsigned char *p = NULL, *tmp;
size_t bufsize = 4096;
/* It is likely that we need to return much more data, so we
start off with a large buffer. */
if (retbuf)
{
*retbuf = p = xtrymalloc (bufsize);
if (!*retbuf)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
assert (resultlen < bufsize);
memcpy (p, result, resultlen);
p += resultlen;
}
do
{
int len = (sw & 0x00ff);
if (DBG_CARD_IO)
log_debug ("apdu_send_simple(%d): %d more bytes available\n",
slot, len);
apdulen = 0;
apdu[apdulen++] = class;
apdu[apdulen++] = 0xC0;
apdu[apdulen++] = 0;
apdu[apdulen++] = 0;
apdu[apdulen++] = len;
memset (apdu+apdulen, 0, sizeof (apdu) - apdulen);
resultlen = RESULTLEN;
2005-11-28 11:52:25 +00:00
rc = send_apdu (slot, apdu, apdulen, result, &resultlen, NULL);
if (rc || resultlen < 2)
{
log_error ("apdu_send_simple(%d) for get response failed: %s\n",
slot, apdu_strerror (rc));
unlock_slot (slot);
return rc? rc : SW_HOST_INCOMPLETE_CARD_RESPONSE;
}
sw = (result[resultlen-2] << 8) | result[resultlen-1];
resultlen -= 2;
if (DBG_CARD_IO)
{
log_debug (" more: sw=%04X datalen=%d\n",
sw, (unsigned int)resultlen);
if (!retbuf && (sw==SW_SUCCESS || (sw&0xff00)==SW_MORE_DATA))
log_printhex (" dump: ", result, resultlen);
}
if ((sw & 0xff00) == SW_MORE_DATA
|| sw == SW_SUCCESS
|| sw == SW_EOF_REACHED )
{
if (retbuf && resultlen)
{
if (p - *retbuf + resultlen > bufsize)
{
bufsize += resultlen > 4096? resultlen: 4096;
tmp = xtryrealloc (*retbuf, bufsize);
if (!tmp)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
p = tmp + (p - *retbuf);
*retbuf = tmp;
}
memcpy (p, result, resultlen);
p += resultlen;
}
}
else
log_info ("apdu_send_simple(%d) "
"got unexpected status %04X from get response\n",
slot, sw);
}
while ((sw & 0xff00) == SW_MORE_DATA);
if (retbuf)
{
*retbuflen = p - *retbuf;
tmp = xtryrealloc (*retbuf, *retbuflen);
if (tmp)
*retbuf = tmp;
}
}
unlock_slot (slot);
if (DBG_CARD_IO && retbuf && sw == SW_SUCCESS)
log_printhex (" dump: ", *retbuf, *retbuflen);
return sw;
#undef RESULTLEN
}
2005-11-28 11:52:25 +00:00
/* Send an APDU to the card in SLOT. The APDU is created from all
given parameters: CLASS, INS, P0, P1, LC, DATA, LE. A value of -1
for LC won't sent this field and the data field; in this case DATA
must also be passed as NULL. The return value is the status word
or -1 for an invalid SLOT or other non card related error. If
RETBUF is not NULL, it will receive an allocated buffer with the
returned data. The length of that data will be put into
*RETBUFLEN. The caller is reponsible for releasing the buffer even
in case of errors. */
int
apdu_send_le(int slot, int class, int ins, int p0, int p1,
int lc, const char *data, int le,
unsigned char **retbuf, size_t *retbuflen)
{
return send_le (slot, class, ins, p0, p1,
lc, data, le,
retbuf, retbuflen,
NULL);
}
/* Send an APDU to the card in SLOT. The APDU is created from all
given parameters: CLASS, INS, P0, P1, LC, DATA. A value of -1 for
LC won't sent this field and the data field; in this case DATA must
also be passed as NULL. The return value is the status word or -1
for an invalid SLOT or other non card related error. If RETBUF is
not NULL, it will receive an allocated buffer with the returned
data. The length of that data will be put into *RETBUFLEN. The
caller is reponsible for releasing the buffer even in case of
errors. */
int
apdu_send (int slot, int class, int ins, int p0, int p1,
int lc, const char *data, unsigned char **retbuf, size_t *retbuflen)
{
2005-11-28 11:52:25 +00:00
return send_le (slot, class, ins, p0, p1, lc, data, 256,
retbuf, retbuflen, NULL);
}
/* Send an APDU to the card in SLOT. The APDU is created from all
given parameters: CLASS, INS, P0, P1, LC, DATA. A value of -1 for
LC won't sent this field and the data field; in this case DATA must
also be passed as NULL. The return value is the status word or -1
for an invalid SLOT or other non card related error. No data will be
returned. */
int
apdu_send_simple (int slot, int class, int ins, int p0, int p1,
int lc, const char *data)
{
2005-11-28 11:52:25 +00:00
return send_le (slot, class, ins, p0, p1, lc, data, -1, NULL, NULL, NULL);
}
/* Same as apdu_send_simple but uses the keypad of the reader. */
int
apdu_send_simple_kp (int slot, int class, int ins, int p0, int p1,
int lc, const char *data,
int pin_mode,
int pinlen_min, int pinlen_max, int pin_padlen)
{
struct pininfo_s pininfo;
pininfo.mode = pin_mode;
pininfo.minlen = pinlen_min;
pininfo.maxlen = pinlen_max;
pininfo.padlen = pin_padlen;
return send_le (slot, class, ins, p0, p1, lc, data, -1,
NULL, NULL, &pininfo);
}
/* This is a more generic version of the apdu sending routine. It
takes an already formatted APDU in APDUDATA or length APDUDATALEN
and returns the with the APDU including the status word. With
HANDLE_MORE set to true this function will handle the MORE DATA
status and return all APDUs concatenated with one status word at
the end. The function does not return a regular status word but 0
2006-04-11 13:53:21 +00:00
on success. If the slot is locked, the function returns
immediately with an error. */
int
apdu_send_direct (int slot, const unsigned char *apdudata, size_t apdudatalen,
int handle_more,
unsigned char **retbuf, size_t *retbuflen)
{
2006-11-28 16:36:02 +00:00
#define RESULTLEN 258
unsigned char apdu[5+256+1];
size_t apdulen;
unsigned char result[RESULTLEN+10]; /* 10 extra in case of bugs in
the driver. */
size_t resultlen;
int sw;
long rc; /* we need a long here due to PC/SC. */
int class;
if (slot < 0 || slot >= MAX_READER || !reader_table[slot].used )
return SW_HOST_NO_DRIVER;
if ((sw = trylock_slot (slot)))
return sw;
/* We simply trunctate a too long APDU. */
if (apdudatalen > sizeof apdu)
apdudatalen = sizeof apdu;
apdulen = apdudatalen;
memcpy (apdu, apdudata, apdudatalen);
class = apdulen? *apdu : 0;
resultlen = RESULTLEN;
2005-11-28 11:52:25 +00:00
rc = send_apdu (slot, apdu, apdulen, result, &resultlen, NULL);
if (rc || resultlen < 2)
{
log_error ("apdu_send_direct(%d) failed: %s\n",
slot, apdu_strerror (rc));
unlock_slot (slot);
return rc? rc : SW_HOST_INCOMPLETE_CARD_RESPONSE;
}
sw = (result[resultlen-2] << 8) | result[resultlen-1];
/* Store away the returned data but strip the statusword. */
resultlen -= 2;
if (DBG_CARD_IO)
{
log_debug (" response: sw=%04X datalen=%d\n",
sw, (unsigned int)resultlen);
if ( !retbuf && (sw == SW_SUCCESS || (sw & 0xff00) == SW_MORE_DATA))
log_printhex (" dump: ", result, resultlen);
}
if (handle_more && (sw & 0xff00) == SW_MORE_DATA)
{
unsigned char *p = NULL, *tmp;
size_t bufsize = 4096;
/* It is likely that we need to return much more data, so we
start off with a large buffer. */
if (retbuf)
{
*retbuf = p = xtrymalloc (bufsize + 2);
if (!*retbuf)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
assert (resultlen < bufsize);
memcpy (p, result, resultlen);
p += resultlen;
}
do
{
int len = (sw & 0x00ff);
if (DBG_CARD_IO)
log_debug ("apdu_send_direct(%d): %d more bytes available\n",
slot, len);
apdulen = 0;
apdu[apdulen++] = class;
apdu[apdulen++] = 0xC0;
apdu[apdulen++] = 0;
apdu[apdulen++] = 0;
apdu[apdulen++] = len;
memset (apdu+apdulen, 0, sizeof (apdu) - apdulen);
resultlen = RESULTLEN;
2005-11-28 11:52:25 +00:00
rc = send_apdu (slot, apdu, apdulen, result, &resultlen, NULL);
if (rc || resultlen < 2)
{
log_error ("apdu_send_direct(%d) for get response failed: %s\n",
slot, apdu_strerror (rc));
unlock_slot (slot);
return rc ? rc : SW_HOST_INCOMPLETE_CARD_RESPONSE;
}
sw = (result[resultlen-2] << 8) | result[resultlen-1];
resultlen -= 2;
if (DBG_CARD_IO)
{
log_debug (" more: sw=%04X datalen=%d\n",
sw, (unsigned int)resultlen);
if (!retbuf && (sw==SW_SUCCESS || (sw&0xff00)==SW_MORE_DATA))
log_printhex (" dump: ", result, resultlen);
}
if ((sw & 0xff00) == SW_MORE_DATA
|| sw == SW_SUCCESS
|| sw == SW_EOF_REACHED )
{
if (retbuf && resultlen)
{
if (p - *retbuf + resultlen > bufsize)
{
bufsize += resultlen > 4096? resultlen: 4096;
tmp = xtryrealloc (*retbuf, bufsize + 2);
if (!tmp)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
p = tmp + (p - *retbuf);
*retbuf = tmp;
}
memcpy (p, result, resultlen);
p += resultlen;
}
}
else
log_info ("apdu_send_sdirect(%d) "
"got unexpected status %04X from get response\n",
slot, sw);
}
while ((sw & 0xff00) == SW_MORE_DATA);
if (retbuf)
{
*retbuflen = p - *retbuf;
tmp = xtryrealloc (*retbuf, *retbuflen + 2);
if (tmp)
*retbuf = tmp;
}
}
else
{
if (retbuf)
{
*retbuf = xtrymalloc ((resultlen? resultlen : 1)+2);
if (!*retbuf)
{
unlock_slot (slot);
return SW_HOST_OUT_OF_CORE;
}
*retbuflen = resultlen;
memcpy (*retbuf, result, resultlen);
}
}
unlock_slot (slot);
/* Append the status word - we reseved the two extra bytes while
allocating the buffer. */
if (retbuf)
{
(*retbuf)[(*retbuflen)++] = (sw >> 8);
(*retbuf)[(*retbuflen)++] = sw;
}
if (DBG_CARD_IO && retbuf)
log_printhex (" dump: ", *retbuf, *retbuflen);
return 0;
#undef RESULTLEN
}