2851: Upgrade clap to 4.0 r=loiclec a=choznerol
# Pull Request
## Related issue
Fixes#2846
This PR is draft based on #2847 to avoid conflict. I will rebase and mark as 'Ready for review' after #2847 is merged.
## What does this PR do?
1. Upgrade clap to the latest version or 4.0 (4.0.9 as of today) by following the [migrating instruction](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md#migrating) from [4.0 changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md#migrating)
2. Fix an `ArgGroup` typo that can only be caught after upgrading to 4.0 in 20a715e29ed17c5a76229c98fb31504ada873597
## Notable changes
### The `--help` message
The format, ordering and indentation of `--help` message was changed in 4.0. I recorded the output of `cargo run -- --help` before and after upgrade to 4.0 for reference.
<details>
<summary>diff</summary>
Output of `diff --ignore-all-space --text --unified --new-file help-message-before.txt help-message-after.txt`:
```diff
--- help-message-before.txt 2022-10-14 16:45:36.000000000 +0800
+++ help-message-after.txt 2022-10-14 16:36:53.000000000 +0800
`@@` -1,12 +1,8 `@@`
-meilisearch-http 0.29.1
+Usage: meilisearch [OPTIONS]
-USAGE:
- meilisearch [OPTIONS]
-
-OPTIONS:
+Options:
--config-file-path <CONFIG_FILE_PATH>
- Set the path to a configuration file that should be used to setup the engine. Format
- must be TOML
+ Set the path to a configuration file that should be used to setup the engine. Format must be TOML
--db-path <DB_PATH>
Designates the location where database files will be created and retrieved
`@@` -26,15 +22,14 `@@`
[default: dumps/]
--env <ENV>
- Configures the instance's environment. Value must be either `production` or
- `development`
+ Configures the instance's environment. Value must be either `production` or `development`
[env: MEILI_ENV=]
[default: development]
[possible values: development, production]
-h, --help
- Print help information
+ Print help information (use `-h` for a summary)
--http-addr <HTTP_ADDR>
Sets the HTTP address and port Meilisearch will use
`@@` -43,63 +38,53 `@@`
[default: 127.0.0.1:7700]
--http-payload-size-limit <HTTP_PAYLOAD_SIZE_LIMIT>
- Sets the maximum size of accepted payloads. Value must be given in bytes or explicitly
- stating a base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
+ Sets the maximum size of accepted payloads. Value must be given in bytes or explicitly stating a base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
[env: MEILI_HTTP_PAYLOAD_SIZE_LIMIT=]
[default: 100000000]
--ignore-dump-if-db-exists
- Prevents a Meilisearch instance with an existing database from throwing an error when
- using `--import-dump`. Instead, the dump will be ignored and Meilisearch will launch
- using the existing database.
+ Prevents a Meilisearch instance with an existing database from throwing an error when using `--import-dump`. Instead, the dump will be ignored and Meilisearch will launch using the existing database.
This option will trigger an error if `--import-dump` is not defined.
[env: MEILI_IGNORE_DUMP_IF_DB_EXISTS=]
--ignore-missing-dump
- Prevents Meilisearch from throwing an error when `--import-dump` does not point to a
- valid dump file. Instead, Meilisearch will start normally without importing any dump.
+ Prevents Meilisearch from throwing an error when `--import-dump` does not point to a valid dump file. Instead, Meilisearch will start normally without importing any dump.
This option will trigger an error if `--import-dump` is not defined.
[env: MEILI_IGNORE_MISSING_DUMP=]
--ignore-missing-snapshot
- Prevents a Meilisearch instance from throwing an error when `--import-snapshot` does not
- point to a valid snapshot file.
+ Prevents a Meilisearch instance from throwing an error when `--import-snapshot` does not point to a valid snapshot file.
This command will throw an error if `--import-snapshot` is not defined.
[env: MEILI_IGNORE_MISSING_SNAPSHOT=]
--ignore-snapshot-if-db-exists
- Prevents a Meilisearch instance with an existing database from throwing an error when
- using `--import-snapshot`. Instead, the snapshot will be ignored and Meilisearch will
- launch using the existing database.
+ Prevents a Meilisearch instance with an existing database from throwing an error when using `--import-snapshot`. Instead, the snapshot will be ignored and Meilisearch will launch using the existing database.
This command will throw an error if `--import-snapshot` is not defined.
[env: MEILI_IGNORE_SNAPSHOT_IF_DB_EXISTS=]
--import-dump <IMPORT_DUMP>
- Imports the dump file located at the specified path. Path must point to a `.dump` file.
- If a database already exists, Meilisearch will throw an error and abort launch
+ Imports the dump file located at the specified path. Path must point to a `.dump` file. If a database already exists, Meilisearch will throw an error and abort launch
[env: MEILI_IMPORT_DUMP=]
--import-snapshot <IMPORT_SNAPSHOT>
- Launches Meilisearch after importing a previously-generated snapshot at the given
- filepath
+ Launches Meilisearch after importing a previously-generated snapshot at the given filepath
[env: MEILI_IMPORT_SNAPSHOT=]
--log-level <LOG_LEVEL>
Defines how much detail should be present in Meilisearch's logs.
- Meilisearch currently supports five log levels, listed in order of increasing verbosity:
- ERROR, WARN, INFO, DEBUG, TRACE.
+ Meilisearch currently supports five log levels, listed in order of increasing verbosity: ERROR, WARN, INFO, DEBUG, TRACE.
[env: MEILI_LOG_LEVEL=]
[default: INFO]
`@@` -110,31 +95,25 `@@`
[env: MEILI_MASTER_KEY=]
--max-index-size <MAX_INDEX_SIZE>
- Sets the maximum size of the index. Value must be given in bytes or explicitly stating a
- base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
+ Sets the maximum size of the index. Value must be given in bytes or explicitly stating a base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
[env: MEILI_MAX_INDEX_SIZE=]
[default: 107374182400]
--max-indexing-memory <MAX_INDEXING_MEMORY>
- Sets the maximum amount of RAM Meilisearch can use when indexing. By default,
- Meilisearch uses no more than two thirds of available memory
+ Sets the maximum amount of RAM Meilisearch can use when indexing. By default, Meilisearch uses no more than two thirds of available memory
[env: MEILI_MAX_INDEXING_MEMORY=]
[default: "21.33 TiB"]
--max-indexing-threads <MAX_INDEXING_THREADS>
- Sets the maximum number of threads Meilisearch can use during indexation. By default,
- the indexer avoids using more than half of a machine's total processing units. This
- ensures Meilisearch is always ready to perform searches, even while you are updating an
- index
+ Sets the maximum number of threads Meilisearch can use during indexation. By default, the indexer avoids using more than half of a machine's total processing units. This ensures Meilisearch is always ready to perform searches, even while you are updating an index
[env: MEILI_MAX_INDEXING_THREADS=]
[default: 5]
--max-task-db-size <MAX_TASK_DB_SIZE>
- Sets the maximum size of the task database. Value must be given in bytes or explicitly
- stating a base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
+ Sets the maximum size of the task database. Value must be given in bytes or explicitly stating a base unit (for instance: 107374182400, '107.7Gb', or '107374 Mb')
[env: MEILI_MAX_TASK_DB_SIZE=]
[default: 107374182400]
```
- ~[help-message-before.txt](https://github.com/meilisearch/meilisearch/files/9715683/help-message-before.txt)~ [help-message-before.txt](https://github.com/meilisearch/meilisearch/files/9784156/help-message-before-2.txt)
- ~[help-message-after.txt](https://github.com/meilisearch/meilisearch/files/9715682/help-message-after.txt)~ [help-message-after.txt](https://github.com/meilisearch/meilisearch/files/9784091/help-message-after.txt)
</details>
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue, or have you listed the changes applied in the PR description (and why they are needed)?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: Lawrence Chou <choznerol@protonmail.com>
Refactored tests code to allow to specify compression (content-encoding) algorithm.
Added tests to verify what actix actually handle different content encodings properly.
2745: Config file support r=curquiza a=mlemesle
# Pull Request
## What does this PR do?
Fixes#2558
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
2789: Fix typos r=Kerollmops a=kianmeng
# Pull Request
## What does this PR do?
Found via `codespell -L crate,nam,hart`.
## PR checklist
Please check if your PR fulfills the following requirements:
- [ ] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
2814: Skip dashboard test if mini-dashboard feature is disabled r=Kerollmops a=jirutka
Fixes#2813
Fixes the following error:
cargo test --no-default-features
...
error: couldn't read target/debug/build/meilisearch-http-ec029d8c902cf2cb/out/generated.rs: No such file or directory (os error 2)
--> meilisearch-http/tests/dashboard/mod.rs:8:9
|
8 | include!(concat!(env!("OUT_DIR"), "/generated.rs"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
error: could not compile `meilisearch-http` due to previous error
2826: Rename receivedDocumentIds into matchedDocuments r=Kerollmops a=Ugzuzg
# Pull Request
## What does this PR do?
Fixes#2799
Changes DocumentDeletion task details response.
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Tested with curl:
```
curl \
-X POST 'http://localhost:7700/indexes/movies/documents/delete-batch' \
-H 'Content-Type: application/json' \
--data-binary '[
23488,
153738,
437035,
363869
]'
{"taskUid":1,"indexUid":"movies","status":"enqueued","type":"documentDeletion","enqueuedAt":"2022-10-01T20:06:37.105416054Z"}%
curl \
-X GET 'http://localhost:7700/tasks/1'
{"uid":1,"indexUid":"movies","status":"succeeded","type":"documentDeletion","details":{"matchedDocuments":4,"deletedDocuments":2},"duration":"PT0.005708322S","enqueuedAt":"2022-10-01T20:06:37.105416054Z","startedAt":"2022-10-01T20:06:37.115562733Z","finishedAt":"2022-10-01T20:06:37.121271055Z"}
```
Co-authored-by: mlemesle <lemesle.martin@hotmail.fr>
Co-authored-by: Kian-Meng Ang <kianmeng@cpan.org>
Co-authored-by: Jakub Jirutka <jakub@jirutka.cz>
Co-authored-by: Jarasłaŭ Viktorčyk <ugzuzg@gmail.com>
2689: Use mimalloc as the global allocator r=Kerollmops a=loiclec
milli has switched its global allocator to mimalloc already, and we have seen some performance gains as a result. Furthermore, we can use mimalloc as the global allocator on all platforms whereas jemalloc was only activated on Linux.
This PR brings mimalloc to Meilisearch as well.
2690: Add LTO and codegen-units=1 to release compile options r=Kerollmops a=loiclec
This PR brings Meilisearch's release compile options in line with milli (see https://github.com/meilisearch/milli/pull/606 ).
Adding LTO and codegen=units=1 will make compile times longer, but they also speed up the final binary significantly.
Co-authored-by: Loïc Lecrenier <loic@meilisearch.com>
2523: Improve the tasks error reporting when processed in batches r=irevoire a=Kerollmops
This fixes#2478 by changing the behavior of the task handler when there is an error in a batch of document addition or update.
What changes is that when there is a user error in a task in a batch we now report this task as failed with the right error message but we continue to process the other tasks. A user error can be when a geo field is invalid, a document id is invalid, or missing.
fixes#2582, #2478
Co-authored-by: Kerollmops <clement@meilisearch.com>
Co-authored-by: ManyTheFish <many@meilisearch.com>
Move `meilisearch_error` to `meilisearch_types::error`
Move `meilisearch_lib::index_resolver::IndexUid` to `meilisearch_types::index_uid`
Add a new `InvalidIndexUid` error in `meilisearch_types::index_uid`
2494: Introduce the new faceting and pagination settings r=ManyTheFish a=Kerollmops
This PR introduces two new settings following the newly created spec https://github.com/meilisearch/specifications/pull/157:
- The `faceting.max_values_per_facet` one describes the maximum number of values (each with a count) associated with a value in a facet distribution query.
- The `pagination.limited_to` one describes the maximum number of documents that a search query can ever return.
Co-authored-by: Kerollmops <clement@meilisearch.com>
2445: Seek-based tasks list r=Kerollmops a=Kerollmops
This PR implements the seek-based pagination for the tasks list following [the spec](https://github.com/meilisearch/specifications/pull/115).
Co-authored-by: Kerollmops <clement@meilisearch.com>
2450: Bump the dependencies r=ManyTheFish a=Kerollmops
In order to use [the latest version of grenad](https://docs.rs/grenad) I bump the dependencies here. We also use the latest versions of all our other dependencies now.
Co-authored-by: Kerollmops <clement@meilisearch.com>
2404: Bring `release-v0.27.1` into `main` r=curquiza a=curquiza
Following the v0.27.1 hotfixes
Co-authored-by: ad hoc <postma.marin@protonmail.com>
Co-authored-by: bors[bot] <26634292+bors[bot]@users.noreply.github.com>
Co-authored-by: Tamo <tamo@meilisearch.com>
Co-authored-by: Clémentine Urquizar <clementine@meilisearch.com>
2173: chore(all): replace chrono with time r=irevoire a=irevoire
Chrono has been unmaintained for a few month now and there is a CVE on it.
Also I updated all the error messages related to the API key as you can see here: https://github.com/meilisearch/specifications/pull/114fix#2172
Co-authored-by: Irevoire <tamo@meilisearch.com>
- Add API keys in snapshots
- Add API keys in dumps
- Rename action indexes.add to indexes.create
- fix QA #1979fix#1979fix#1995fix#2001fix#2003
related to #1890
implements:
https://github.com/meilisearch/specifications/blob/develop/text/0085-api-keys.md
- Add tests on API keys management route (meilisearch-http/tests/auth/api_keys.rs)
- Add tests checking authorizations on each meilisearch routes (meilisearch-http/tests/auth/authorization.rs)
- Implement API keys management routes (meilisearch-http/src/routes/api_key.rs)
- Create module to manage API keys and authorizations (meilisearch-auth)
- Reimplement GuardedData to extend authorizations (meilisearch-http/src/extractors/authentication/mod.rs)
- Change X-MEILI-API-KEY by Authorization Bearer (meilisearch-http/src/extractors/authentication/mod.rs)
- Change meilisearch routes to fit to the new authorization feature (meilisearch-http/src/routes/)
- close#1867
