diff --git a/README.md b/README.md
index 873a13a..6186d58 100644
--- a/README.md
+++ b/README.md
@@ -50,8 +50,16 @@ Use various sensors on the RaspberryPi with Golang (like a ninja!)
 
   [Documentation](http://godoc.org/github.com/kid0m4n/go-rpi/sensor/us020) [Datasheet](http://www.elechouse.com/elechouse/images/product/Digital%20light%20Sensor/bh1750fvi-e.pdf)
 
-##Interfaces
+## Interfaces
 
-###Keypad(4x3)
+### Keypad(4x3)
 
   [Product Page](http://www.adafruit.com/products/419#Learn)
+
+## Controllers
+
+### PCA9685
+  16-channel, 12-bit PWM Controller with I2C protocol
+
+  [Datasheet] (http://www.adafruit.com/datasheets/PCA9685.pdf)
+  [Product Page] (http://www.adafruit.com/products/815)
diff --git a/controller/pca9685/pca9685.go b/controller/pca9685/pca9685.go
new file mode 100644
index 0000000..84fde07
--- /dev/null
+++ b/controller/pca9685/pca9685.go
@@ -0,0 +1,285 @@
+// Package pca9685 allows interfacing with the pca9685 16-channel, 12-bit PWM Controller through I2C protocol.
+package pca9685
+
+import (
+	"log"
+	"math"
+	"sync"
+	"time"
+
+	"github.com/kid0m4n/go-rpi/i2c"
+)
+
+const (
+	clockFreq        = 25000000
+	pwmControlPoints = 4096
+
+	mode1RegAddr    = 0x00
+	preScaleRegAddr = 0xFE
+
+	pwm0OnLowReg = 0x6
+)
+
+// A PCA9685 interface implements access to the controller.
+type PCA9685 interface {
+	// SetPwm sets the ON and OFF time registers for pwm signal shaping.
+	// n: channel 0-15
+	// onTime/offTime: 0-4095
+	SetPwm(n int, onTime int, offTime int) error
+
+	// Wake allows the controller to exit sleep mode and resume with PWM generation.
+	Wake() error
+
+	// Sleep puts the controller in sleep mode. Does not change the pwm control registers.
+	Sleep() error
+
+	// Close stops the controller and resets mode and pwm controller registers.
+	Close() error
+
+	// SetDebug is used to enable logging (debug mode).
+	SetDebug(status bool)
+}
+
+type pca9685 struct {
+	bus  i2c.Bus
+	addr byte
+	freq int
+
+	initialized bool
+	mu          sync.RWMutex
+
+	debug bool
+}
+
+// The pca9685 controller supports pwm frequencies from 40Hz to 1000Hz
+
+// New creates a new PCA9685 interface.
+func New(bus i2c.Bus, addr byte, freq int) PCA9685 {
+	return &pca9685{bus: bus, addr: addr, freq: freq}
+}
+
+// SetDebug is used to enable logging (debug mode).
+func (d *pca9685) SetDebug(status bool) {
+	d.debug = status
+}
+
+func (d *pca9685) mode1Reg() (byte, error) {
+	return d.bus.ReadByteFromReg(d.addr, mode1RegAddr)
+}
+
+func (d *pca9685) setup() (err error) {
+	d.mu.RLock()
+	if d.initialized {
+		d.mu.RUnlock()
+		return
+	}
+	d.mu.RUnlock()
+
+	d.mu.Lock()
+	defer d.mu.Unlock()
+
+	preScaleValue := byte(math.Floor(float64(clockFreq/(pwmControlPoints*d.freq))+float64(0.5)) - 1)
+	if d.debug {
+		log.Printf("pca9685: calculated Prescale value = %#02x", preScaleValue)
+	}
+
+	mode1Reg, err := d.mode1Reg()
+	if err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: read MODE1 Reg [regAddr: %#02x] Value: [%v]", mode1RegAddr, mode1Reg)
+	}
+
+	if err = d.sleep(); err != nil {
+		return
+	}
+
+	if err = d.bus.WriteToReg(d.addr, preScaleRegAddr, byte(preScaleValue)); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: prescale value [%#02x] written to PRE_SCALE Reg [regAddr: %#02x]", preScaleValue, preScaleRegAddr)
+	}
+
+	if err = d.wake(); err != nil {
+		return
+	}
+
+	newmode := ((mode1Reg | 0x01) & 0xDF)
+	if err = d.bus.WriteToReg(d.addr, mode1RegAddr, newmode); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: new mode [%#02x] [disabling register auto increment] written to MODE1 Reg [regAddr: %#02x]", newmode, mode1RegAddr)
+	}
+
+	d.initialized = true
+	if d.debug {
+		log.Printf("pca9685: driver initialized with pwm freq: %v", d.freq)
+	}
+
+	return
+}
+
+// SetPwm sets the ON and OFF time registers for pwm signal shaping.
+// channel: 0-15
+// onTime/offTime: 0-4095
+func (d *pca9685) SetPwm(n, onTime, offTime int) (err error) {
+	if err = d.setup(); err != nil {
+		return
+	}
+
+	onTimeLowReg := byte(pwm0OnLowReg + (4 * n))
+
+	onTimeLow := byte(onTime & 0xFF)
+	onTimeHigh := byte(onTime >> 8)
+	offTimeLow := byte(offTime & 0xFF)
+	offTimeHigh := byte(offTime >> 8)
+
+	if err = d.bus.WriteToReg(d.addr, onTimeLowReg, onTimeLow); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: writing On-Time Low [%#02x] to CHAN%v_ON_L reg [RegAddr: %#02x]", onTimeLow, n, onTimeLowReg)
+	}
+
+	onTimeHighReg := onTimeLowReg + 1
+	if err = d.bus.WriteToReg(d.addr, onTimeHighReg, onTimeHighReg); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: writing On-Time High [%#02x] to CHAN%v_ON_H reg [RegAddr: %#02x]", onTimeHigh, n, onTimeHighReg)
+	}
+
+	offTimeLowReg := onTimeHighReg + 1
+	if err = d.bus.WriteToReg(d.addr, offTimeLowReg, offTimeLow); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: writing Off-Time Low [%#02x] to CHAN%v_OFF_L reg [RegAddr: %#02x]", offTimeLow, n, offTimeLowReg)
+	}
+
+	offTimeHighReg := offTimeLowReg + 1
+	if err = d.bus.WriteToReg(d.addr, offTimeHighReg, offTimeHigh); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: writing Off-Time High [%#02x] to CHAN%v_OFF_H reg [RegAddr: %#02x]", offTimeHigh, n, offTimeHighReg)
+	}
+
+	return
+}
+
+// Close stops the controller and resets mode and pwm controller registers.
+func (d *pca9685) Close() (err error) {
+	if err = d.setup(); err != nil {
+		return
+	}
+
+	if err = d.sleep(); err != nil {
+		return
+	}
+
+	if d.debug {
+		log.Println("pca9685: reset request received")
+	}
+
+	if err = d.bus.WriteToReg(d.addr, mode1RegAddr, 0x00); err != nil {
+		return
+	}
+
+	if d.debug {
+		log.Printf("pca9685: cleaning up all PWM control registers")
+	}
+
+	for regAddr := 0x0; regAddr <= 0x45; regAddr++ {
+		if err = d.bus.WriteToReg(d.addr, byte(regAddr), 0x00); err != nil {
+			return
+		}
+	}
+
+	if d.debug {
+		log.Printf("pca9685: done Cleaning up all PWM control registers")
+	}
+
+	if d.debug {
+		log.Println("pca9685: controller reset")
+	}
+
+	return
+}
+
+func (d *pca9685) sleep() (err error) {
+	if d.debug {
+		log.Println("pca9685: sleep request received")
+	}
+
+	mode1Reg, err := d.mode1Reg()
+	if err != nil {
+		return
+	}
+	sleepmode := (mode1Reg & 0x7F) | 0x10
+	if err = d.bus.WriteToReg(d.addr, mode1RegAddr, sleepmode); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: sleep mode [%#02x] written to MODE1 Reg [regAddr: %#02x]", sleepmode, mode1RegAddr)
+	}
+
+	if d.debug {
+		log.Println("pca9685: controller set to Sleep mode")
+	}
+
+	return
+}
+
+// Sleep puts the controller in sleep mode. Does not change the pwm control registers.
+func (d *pca9685) Sleep() (err error) {
+	if err = d.setup(); err != nil {
+		return
+	}
+
+	return d.sleep()
+}
+
+func (d *pca9685) wake() (err error) {
+	if d.debug {
+		log.Println("pca9685: wake request received")
+	}
+
+	mode1Reg, err := d.mode1Reg()
+	if err != nil {
+		return
+	}
+	wakeMode := mode1Reg & 0xEF
+	if (mode1Reg & 0x80) == 0x80 {
+		if err = d.bus.WriteToReg(d.addr, mode1RegAddr, wakeMode); err != nil {
+			return
+		}
+		if d.debug {
+			log.Printf("pca9685: wake mode [%#02x] written to MODE1 Reg [regAddr: %#02x]", wakeMode, mode1RegAddr)
+		}
+
+		time.Sleep(500 * time.Microsecond)
+	}
+
+	restartOpCode := wakeMode | 0x80
+	if err = d.bus.WriteToReg(d.addr, mode1RegAddr, restartOpCode); err != nil {
+		return
+	}
+	if d.debug {
+		log.Printf("pca9685: restart mode [%#02x] written to MODE1 Reg [regAddr: %#02x]", restartOpCode, mode1RegAddr)
+	}
+
+	return
+}
+
+// Wake allows the controller to exit sleep mode and resume with PWM generation.
+func (d *pca9685) Wake() (err error) {
+	if err = d.setup(); err != nil {
+		return
+	}
+
+	return d.wake()
+}
diff --git a/motion/servo/servo.go b/motion/servo/servo.go
new file mode 100644
index 0000000..3102224
--- /dev/null
+++ b/motion/servo/servo.go
@@ -0,0 +1,61 @@
+// Package servo allows control of servos using a PWM controller.
+package servo
+
+import (
+	"log"
+)
+
+// A PWM interface implements access to a pwm controller.
+type PWM interface {
+	SetPwm(n int, onTime int, offTime int) error
+}
+
+// A SERVO interface implements access to the servo.
+type Servo interface {
+	SetAngle(angle int) error
+
+	SetDebug(v bool)
+}
+
+type servo struct {
+	pwm  PWM
+	freq int
+	n    int
+
+	minms, maxms float64
+
+	debug bool
+}
+
+// New creates a new SERVO interface.
+// pwm: instance of a PWM controller.
+// freq: Frequency of pwm signal (typically 50Hz)
+// n: PWM channel of the pwm controller to be used
+// minms: Pulse width corresponding to servo position of 0deg
+// maxms: Pulse width corresponding to servo position of 180deg
+func New(pwm PWM, freq int, n int, minms, maxms float64) Servo {
+	return &servo{
+		pwm:   pwm,
+		freq:  freq,
+		n:     n,
+		minms: minms,
+		maxms: maxms,
+	}
+}
+
+// SetDebug is used to enable logging (debug mode).
+func (s *servo) SetDebug(v bool) {
+	s.debug = v
+}
+
+// SetAngle sets the servo angle.
+func (s *servo) SetAngle(angle int) error {
+	ms := s.minms + float64(angle)*(s.maxms-s.minms)/180
+	offTime := int(ms * float64(s.freq) * 4096 / 1000)
+
+	if s.debug {
+		log.Printf("servo: given angle %v calculated ms %2.2f offTime %v", angle, ms, offTime)
+	}
+
+	return s.pwm.SetPwm(s.n, 0, offTime)
+}
diff --git a/samples/pca9685.go b/samples/pca9685.go
new file mode 100644
index 0000000..23fdb8d
--- /dev/null
+++ b/samples/pca9685.go
@@ -0,0 +1,46 @@
+package main
+
+import (
+	"log"
+	"os"
+	"os/signal"
+	"time"
+
+	"github.com/kid0m4n/go-rpi/controller/pca9685"
+	"github.com/kid0m4n/go-rpi/i2c"
+)
+
+func main() {
+	bus, err := i2c.NewBus(1)
+	if err != nil {
+		log.Panic(err)
+	}
+
+	pca9685 := pca9685.New(bus, 0x41, 1000)
+	pca9685.SetDebug(true)
+	defer pca9685.Close()
+
+	if err := pca9685.SetPwm(15, 0, 1000); err != nil {
+		log.Panic(err)
+	}
+
+	c := make(chan os.Signal, 1)
+	signal.Notify(c, os.Interrupt, os.Kill)
+
+	timer := time.Tick(2 * time.Second)
+	sleeping := false
+
+	for {
+		select {
+		case <-timer:
+			sleeping = !sleeping
+			if sleeping {
+				pca9685.Sleep()
+			} else {
+				pca9685.Wake()
+			}
+		case <-c:
+			return
+		}
+	}
+}
diff --git a/samples/servo.go b/samples/servo.go
new file mode 100644
index 0000000..445ac4f
--- /dev/null
+++ b/samples/servo.go
@@ -0,0 +1,51 @@
+package main
+
+import (
+	"log"
+	"os"
+	"os/signal"
+	"time"
+
+	"github.com/kid0m4n/go-rpi/controller/pca9685"
+	"github.com/kid0m4n/go-rpi/i2c"
+	"github.com/kid0m4n/go-rpi/motion/servo"
+)
+
+func main() {
+	bus, err := i2c.NewBus(1)
+	if err != nil {
+		log.Panic(err)
+	}
+
+	pwm := pca9685.New(bus, 0x42, 50)
+	defer pwm.Close()
+
+	servo := servo.New(pwm, 50, 0, 1, 2.5)
+	servo.SetDebug(true)
+
+	c := make(chan os.Signal, 1)
+	signal.Notify(c, os.Interrupt, os.Kill)
+
+	turnTimer := time.Tick(500 * time.Millisecond)
+	left := true
+
+	servo.SetAngle(90)
+	defer func() {
+		servo.SetAngle(90)
+	}()
+
+	for {
+		select {
+		case <-turnTimer:
+			left = !left
+			switch left {
+			case true:
+				servo.SetAngle(70)
+			case false:
+				servo.SetAngle(110)
+			}
+		case <-c:
+			return
+		}
+	}
+}